ircam raspberry pi shield — first steps

Here are some first passes at a Raspberry Pi shield design. I don't quite yet know what I'm doing, but here's the rough idea I'm aiming at. I'm not sure how sensible it is, so I'd love to get any feedback!

It'd be nice to have a device that: – controls a filter switcher motor for rapid switching between filters – has both VIS and IR light sensors, to calibrate camera readings – allows for several additional sensors to be designed and plugged in (temperature, humidity, soil moisture, etc) – operates on battery power

ircam raspberry pi shield -- first stepsHere is a first pass at a Raspberry Pi shield design for controlling a filter switcher, providing webcam calibration using a light sensor, enabling rechargeable battery power via a LiPo battery, and providing ports for other add-on sensors — temp, humidity, soil moisture, etc. I don't yet have much experience designing printed circuit boards, so I'd love to get any feedback — both on the schematics, as well as the overall design concept.

It'd be nice to have a device that:

  • controls a filter switcher motor for rapid switching between filters
  • has both VIS and IR light sensors, to calibrate camera readings
  • allows for several additional sensors to be designed and plugged in (temperature, humidity, soil moisture, etc)
  • operates on battery power

Further: we'd like to be able to place some of the sensors (e.g. the light sensor) in arbitrary orientations — we want it to be getting a good reading, and not be obscured by other structures in our device (or the device case).

I started thinking about how to make this work on a Raspberry Pi, and I realized that one approach to this problem had some possible overlaps with an Arduino-compatible platform I'd been working on with friends, recently. We've been trying to come up with a slightly re-designed Arduino-compatible board that has a “port” structure allowing for a (somewhat) “plug and play” sensor architecture. We'd already begun to design the boards and start in on the peripherals, so I figured I'd leverage some of that work, here. Still not sure if it's the right approach, but in the spirit of throwing crazy ideas together and seeing what sticks …

ircam raspberry pi shield -- first steps schematicI designed a shield for the Raspberry Pi that simply adds a bunch of analog I/O (which the Raspberry Pi lacks, by default), and a bunch of additional digital pins (PWM-capable pins, to be exact — I'm not sure this was wise, and I might need to switch this to a simple I/O expander). Here's the schematic for this shield, so far:

I also added eight “OLM-style connectors” (we've been calling the Arduino-compatible prototype I mentioned above the “Open Lab Monitor (OLM)” — but we could henceforth refer to it as a “PL Connector”, if folks like the interface!). Each of these eight connectors is a 2×5 arrangement of pins with connections to:

  • 3.3 V
  • ground
  • SPI
  • I2C
  • two digital I/O pins
  • one analog I/O pin

 

For more detail: ircam raspberry pi shield — first steps


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top