3d Printed Raspberry Pi Security Camera

Update: If you like my instructable please vote for me in the Raspberry Pi and Epilog challenge. I will also update the 5th step to include how I setup Motion on the first boot. Thank you for your clicks and thank you Instructable.com for the feature!!

In this Instructable we are going to design and 3D print a camera housing body for a raspberry pi and rpi compatible camera. To make it all work we will load and setup motionPie. motionPie is an opensource project written and curated by Calin Crisen. This is a very impressive program that allows you many options in setup. The details for setup are taken care of for you and you will have a great multi-node security system with distributed processing and storage. Plus they have Raspberry Pi's so you can still do other things like airplay, emulator or any number of concurrent activities. We will only be discussing the setup of motionPie and the printing of a camera body.

Our unique aspect of this project is the design and printing of the camera body. This is an exercise in creating a cleaner design that would be recognizable by most people as a product that can be purchased in any consumer electronics store. Most projects I have seen involving the Raspberry Pi as a camera utilize a dummy camera body. I readily admit that a dummy camera shell is probably a cheaper and more efficient way of going about his project. Disadvantages to that approach is that you still need to somehow mount the RPi and of course route the wiring, sometimes requiring 3D printed internal mounts anyways. When we design our own we can ensure a snug proper fit, and we can add other feature or different shapes and sizes for different purposes. The last page of this Instructable we will explore some of our future options and upgrades.3d Printed Raspberry Pi Security Camera

Step 1: Non 3D printed Parts To Complete This Project

In this project we are going to utilize some M3 hardware, an RPI, its accessories, and a few 3D printed Parts. We will discuss the 3D printed parts in the next step. Here is a list of the non 3D printed parts that we will need.

(1) Raspberry Pi Model B

(1) Sainsmart NOIR with flat cable for Raspberry Pi

(1) Edimax Wifi adapter

(1) 5V 2A Powersupply with Micro USB plug

(1) Ethernet cable (temporary for initial setup)

(15) M3 x 8mm Buttonhead Socketcap Screws

(1) M3 x 20mm Socket Cap Screw

(1) M4 x 20mm Socket Cap Screw

(3) 1 5/8″ Deck Screws

(1) 1 1/2″ (38mm) Clear Acrylic disk (lens)

Of course you will need a few handtools for this build as well but I will leave that up to you.

Step 2: Designing Parts for 3D Printing

In the above link you will go to my thingiverse page and be able to download the files to 3D print this object. If you do not have a 3D Printer you can go to 3D Hubs and order from my hub or from a hub closer to you. I will give the actual instructions for 3D printing on the next step. This step is more of a discussion of designing parts for additive manufacturing while adhering to industrial design principals

The pictures for this step are 3 of the 8 pieces that are required to build this camera housing. I wanted to show what I am starting to do in my designs to look more and more commercial. The goal is to create an item that is virtually indistinguishable in quality and appearance, from an item that can be purchased on the market.

The disc shaped piece is the inner camera cone and recess to hold the 38mm acrylic protective lens. On the side we can see in the rendering, we also see the screw hole supports and fitted recess for the actual camera board. Adding these make for a strong piece but also shelling out the design also makes for a lighter piece that looks like a piece that came from a factory. Lighter pieces also translate into less filament used and faster printing times.

The second piece is actually the bottom mount of the entire camera cylinder housing. It is an exterior finished piece as well as structural. To make a piece strong and attractive we fillet (curve) the edges especially perpendicular support pieces. This smooths everything but also provides base support to cross connected pieces. Finally we recess our screw locations and we use stainless steel button head screws. The screw heads are exposed so these will not rust and they are also attractive since the head is rounded.

Our final example is the main housing. it is printed without supports and is strong and has integrated hardware locations to secure everything in place. The Raspberry Pi is secured to its own mounting posts and the wires are all routed through a specific channel to keep them secure, dry, neat and out of the way. We will see more examples in the printing and assembly steps.3d Printed Raspberry Pi Security Camera schematic

Step 3: 3D Printing Instructions

I will try to be clear and concise in these instructions to help you have a successful print the first time. I have placed the pictures in the top bar in the order of the download on the Thingiverse page. I will also have the instructions and names in that order in this step. It is not required to print in this order. In fact, I printed the V1_AV_CAM_ Bottom.stl first and the V1_AV_CAM_Mount.stl second. This let me get my electronics in place first. Most of the parts are unsupported but they are all easy to remove the support from if you follow these instructions. Thank you for following along with my Instructable this far.

V1_AV_CAM_Lens_Mount.stl Print with 5 bottom and 5 Top layers, 3 layers, 20% infill. This should actually print the piece solid. It is only 2mm tall. NO support is required.

V1_AV_CAM_ Top.stl This is the tallest piece at 175mm. If your printer can not print this tall you may have to lay the piece down and print with supports. If you can print as it sits it does not require supports and only needs a 5mm Brim. 3 shells, 3 layers top and bottom and 20% infill.

V1_AV_CAM_Mount.stl This piece needs support with 5mm spacing. there will be a small amount of support under the actual camera board mount edges that is hard to get to. It is not necessary to remove this material. This mount is for the sainsmart noir camera. It does not fit the raspicam board. I will probably make a piece for it later.

V1_AV_CAM_Back.stl The back is printed as it sits. it does need support at 5mm. A 5mm brim is also helpful with this piece. 3 shells 3layers top and bottom 20% infill.

V1_AV_CAM_Bottom.stl This is the main piece that all the others are built around. I printed it first myself. It does not need supports or brim. just 3 shells 5 layers top and bottom 20% infill.

 

For more detail: 3d Printed Raspberry Pi Security Camera


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top