Heat Activated Cooling Fan Controller




002

Heat activated cooling fan controller is a simple project which operates a brushless fan when the temperature in a particular area goes above a set point, when temperature return normal, fan automatically turns off. The project is built using LM358 Op-amp and LM35 temperature Sensor. Project requires 12V DC supply and can drive 12V Fan. This project is useful in application like Heat sink temperature controller, PC, heat sensitive equipment, Power supply, Audio Amplifiers, Battery chargers, Oven etc

Heat Activated Cooling Fan Controller

The SMD SO8 LM35 used as temperature sensor, LM358 act as comparator and provides high output when temperature rise above set point, high output drive the Fan trough driver transistor. The LM35 series are precision integrated-circuit temperature devices with an output voltage linearly-proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracy of ±¼°C at room temperature. Temperature sensing range 2 to 150 centigrade. LM35 provides output of 10mV/Centigrade.

Features

  • Supply 12V DC 1Amps
  • Fan 12V DC , 500mA
  • Range : 2 °C to 150 °C
  • Open Collector Output
  • It can drive PC fan
  • Onboard preset to set the Fan trigger level
  • Onboard Power LED
  • Onboard Output LED
  • Output Driver Transistor
  • Header Connector for Supply and Fan
  • PCB dimensions 59.85 mm x 12.70 mm

For More Details:  Heat Activated Cooling Fan Controller




Leave a Comment

© 2015 Powered By Engineering Projects Team, Raspberry Pi Projects

Scroll to top