16 Channel InfraRed remote controller

16 Channel Infra-Red remote controller is based on PIC16F73 Microcontroller from Microchip. The receiver part follows RC5 (Philips) Code Format. Tiny receiver provides 16 latch outputs or 8 Latch + 8 Momentary outputs by closing Jumper J1. All outputs are TTL and can drive Relay board or solid state relay. The circuit uses TSOP1738 Infra-Red receiver module which provides high degree of noise immunity against interfering light source.

16 Channel InfraRed remote controller

Features

  • Supply Remote Transmitter RC5 Philips 2XAAA Battery
  • Supply Receiver 7V to 12V DC
  • Modulation 38Khz
  • Philips RC5 Code Format
  • Operating range up to 20 feet
  • 2 Pin Screw Terminals for Supply Input
  • On Board Power LED
  • Onboard VT (Valid Transmission) LED
  • All Outputs TTL Level provided with Header Connector
  • Jumper (J1) for Mode Selection
  • J1 Open 16 Latch Outputs
  • J1 Closed 8Latch + 8 Momentary

Application

  • Robotics
  • Lights
  • Fans
  • Home Appliances
  • Remote Door closer
  • Remote Curtains
  • Security Systems

For More Details :  16 Channel InfraRed remote controller

Scroll to Top
Read previous post:
how to get started with iot using raspberry pi and putty part 2
How to Get Started With IoT Using Raspberry Pi and PuTTY – Part 2

In this part we will be building the Android application for the Raspberry Pi IoT project from Part 1 of...

Close