In July of last year, we talked about the BeagleCore which is a miniature version of the BeagleBone Black. BeagleCore had a Kickstarter in the coming months, but were unable to reach their goal. But it looks like they kept on and have now released the two versions of the BeagleCore, including the gerbers(not the board files).
BEAGLECORE™ is licenced under Creative Commons (CC-BY-SA).
We have therefore published a ZIP-file containing all relevant information on footprint, schematics, BOM and many more for BEAGLECORE™ BCM1 & BCS1.
There are two part numbers to the BeagleCore system.
BCS1
The Beagle Core ™ BCS1 starter kit consists of the Beagle Core ™ BCM1 module as well as a specially adapted base board, on which the module is soldered. In the dimensions and functions in the Beagle Core ™ base board corresponding to the BeagleBone Black. Using an ingenious PIN assignment we provide access to all the functionality of the BeagleBone Black. If you can run your application on a BeagleBone, it also works with the Beagle Core ™ BCS1 Starter Kit, go with your development on the safe side.
You can buy the BCS1 BeagleCore for $149.81/€138,30 from the below link.
BCM1
This is the tiny module that can be mated to your design. The Beagle Core ™ BCM1 module is just one-third as large as a conventional BeagleBone Black. Nevertheless, it provides the same level in terms of core functionality. Using an ingenious PIN assignment we provide access to all the functionality of the BeagleBone Black. If you can run your application on a BeagleBone, it also works on a Beagle Core ™ BCM1
You can buy the BCS1 BeagleCore for $63.88/€58.96 from the below link.
For More Details: BeagleCore Schematics and Gerbers Released
