FORTEC EXPANDS SBC TO PLUG-AND-PLAY TFT DISPLAY KIT

The supplier of complete solutions for display technology, power, and embedded systems, Fortec Electronik, now offers iBASE’s IB818, a single board computer (SBC) expanded to plug-and-play TFT display kit. According to the company, the iBASE IB818 single board computer already configured for display will help facilitate a quick and fast project start upon delivery. Users only need to plug it in and get started immediately.

The iBASE IB818 which measures 102 x 147 mm (4” x 5.8”) is complemented with accessories such as display, cables, memory and SSD disk etc. Among its many features, the single board computer configured to initiate a fast project start includes an SBC display kit with Tiamma and AUO in diagonals from 7 to 24 inches, two SATA III interfaces, two Gigabit LAN (Intel I210IT PCI-E and I211AT PCI-E) for ethernet, an installed AMI BIOS chip, an Intel SoC integrated Gen9 18EUs graphics and, an HDMI 1.4b display and two 24-bit dual LVDS (18/24bit) interfaces for video output. The board is also configured to run on the Intel Celeron N3350 processor 4GB DDR3L RAM and has a 32GB mSATA SSD memory for external storage.

The 3.5-inch disk-size single-board computer expanded to a plug-and-play kit has four USB 3.0 onboard ports, two USB 2.0 ports via pin-header, one RS232/422/485 (jumperless selection) and three RS232 serial ports. It also has 2 mini slot types (2 Mini PCI-E, one full and one half-size), an H/W monitor and a watchdog timer of 256 levels. It is conditioned to operate on a wide temperature range and under a relative humidity of 90% (non-condensing at 60oC).

IB818 is widely applicable in various fields – the medical world, the industrial Internet of Things (IoT), the automation and factory space, with self-service machines and point-of-sale systems, measuring systems and even in the transport field. However, there would not be any scarcity or shortage in supply of this kit in the near future as iBASE has guaranteed a long term availability for the kit.

Meanwhile, all accessories for the IB818 kit has been tested and approved for immediate use by Fortec. Fortec also makes samples available from stock and supplies the IB818F with the displays, accessories and the pre-installed Windows operating system on a project base. User’s manual and datasheet can be downloaded from IBase’s website.

Read more: FORTEC EXPANDS SBC TO PLUG-AND-PLAY TFT DISPLAY KIT


About The Author

Muhammad Bilal

I am highly skilled and motivated individual with a Master's degree in Computer Science. I have extensive experience in technical writing and a deep understanding of SEO practices.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top