1.Features
1.Control chip is STM8S003F3P6
2.All pins can be available,and mark pins,but male pins should be welded by customers in person(Customers should provide your own male pins)
3.Support SWIM debug mode
4.There be two power supply mode,USB MINI wire and 2.54 male pin
5.You can choose crystal oscillator outside.
6.PD3 pin,connect with a LED lamp,in order to debug.
2.Application Range
STM8S003F3P6 is based on 8 bit frame structure,it has abundant resource.
3.Specification
- Chip:STM8S003F3P6
- Voltage:3.3V/5V(USB port)
- PCB size:38.5*28mm
7.Download instructions
Hardware equipment:ST-Link downloader (including four DuPont line),PC,STM8 minimum system board
Application software:IAR or STVP
Wiring method:
|
ST-Link |
STM8 minimum system board |
|
VCC |
VCC |
|
GND |
GND |
|
SWIM |
SWIM |
|
RST |
RST |
Attention:ST-Link selects 3.3V output,the USB port of STM8 minimum system board,connect with 5V power.
For more detail: ICStation STM8 Minimum System Board
