ISYS-6030 60 GHZ RADAR SYSTEM

InnoSenT’s radar is a highly precise distance measurement system for level determination and collision protection

InnoSenT’s iSYS-6030 radar system offers high-precision, focused distance measurement. The product is ideal for level measurement and collision avoidance. It enables reliable and exact distance detection even under extreme conditions such as heat, dust, or vibration. The radar collects data from different materials or physical states such as granules, powders, or liquids. It works even in challenging indoor and outdoor environments. The iSYS-6030 operates between 60 GHz to 64 GHz frequency. The sensor has a narrow antenna pattern with a concentrated beam for excellent measurement results. The detection range is up to 40 meters. The separation of two targets with the same radar cross-section is possible with a resolution of 12 cm. The field of view is very focused and precise with only 6° in azimuth and elevation. The radar system detects stationary and slowly moving targets and outputs the distance and signal strength in a target list. With the help of the non-contact distance measurement, it is possible, for example, to determine the fill level of container or the liquid gauge in a container. Alternatively, the distance measurement is used to prevent collisions of crane and large systems, as well as of semi-autonomous pallet or lift trucks and other means of transport.

The distance measurement is impressively accurate and reliable thanks to the achieved and a very low measurement error rate of only ±0.1% over range. The iSYS-6030 works within a temperature range of -40°C to +85°C. It has a fast update rate of 20 ms for continuous distance control and enables fast measuring cycles.

Important signal processing functions are already integrated into the system. For example, it is equipped with a processing unit to simplify the use of non-contact distance measurement for users. The radar provides information about distance and signal strength as a digital target list. The customer can use the product as a single target or multiple target detector.

The user can program and assign the four outputs individually. This opens additional setting options and the connection of extended control functions, so the output can be used as a trigger. Here is a practical example: the sensor indicates its start-up and is ready for measuring. Then, an appropriately programmed output can trigger a measurement. Afterward, the sensor switches off again. For easy configuration, the manufacturer provides a user manual and a GUI.

Read more: ISYS-6030 60 GHZ RADAR SYSTEM

Leave a Comment

Your email address will not be published.

Scroll to Top