KHADAS VIM3 AMLOGIC S922X BOARD TO SUPPORT M.2 NVME SSD, WIFI 5, AND BLUETOOTH 5 CONNECTIVITY

The VIM3 SBC is the latest iteration of the popular Khadas VIM series, that will be equipped with the new Amlogic S922X SoC. It is designed with the same form-factor as our popular VIM2 and VIM1, with up to 4GB of LPDDR4/4X RAM and 32GB of EMMC storage; this makes it compatible with existing accessories.

KHADAS VIM3 AMLOGIC S922X BOARD TO SUPPORT M.2 NVME SSD, WIFI 5, AND BLUETOOTH 5 CONNECTIVITY

3 models of VIM3 are planned for release, however specifications for only the first model are available at this time. They will announce the exact launch date, and information about the other models in email updates.

Khadas VIM3 Preliminary Specifications:

  • SoC – Amlogic S922X hexa-core processor with 4x Arm Cortex-A73 and 2x Cortex A53 cores, Arm Mali-G52 MP4 GPU, built-in Cortex-M4 core for “always-on” processing
  • MCU – STMicro STM8S003 with Programmable EEPROM for power management, customizations, and boot media configuration
  • System Memory & StorageVIM3 Basic – 2GB LPDDR4/4X RAM, 16GB eMMC 5.1 flash
  • VIM3 Pro – 4GB LPDDR4/4X RAM, 32GB eMMC 5.1 flash
  • Common – 16MB SPI flash, microSD card slot supporting up to UHS-I SDR104, support for M.2 2280 NVMe SSD (see Expansion section)
  • Video Output & Display InterfaceHDMI2.1 transmitter with 3D, Dynamic HDR, CEC, and HDCP 2.2 support
  • 4-lane MIPI-DSI interface up to 1920 x 1080
  • 10-pin 0.5mm Pitch FPC Connector for touch panel
  • Video4K UHD H.265 75fps 10-bit video decoder & low latency 1080p H.265 / H.264 60fps decoder
  • Supports multi-video decoding up to [email protected] + [email protected]
  • Dolby Vision and HDR10, HDR10+, HLG, and PRIME HDR video processing
  • ConnectivityGigabit Ethernet with WoL support
  • 802.11a/b/g/n/ac WiFI 5, 2X2 MIMO with RSDB and Bluetooth 5.0 via Ampak AP6398S module
  • USB – 2x USB 3.0 ports, 1x USB 2.0 OTG port with USB PD support
  • Sensor – KXTJ3-1057 3-axis digital accelerometer
  • ExpansionM.2 Socket with single lane PCIe 2.0, USB 2.0, I2S, I2C, ADC, 100M Ethernet PHY interface, GPIO, MCU_PA2

Read more: KHADAS VIM3 AMLOGIC S922X BOARD TO SUPPORT M.2 NVME SSD, WIFI 5, AND BLUETOOTH 5 CONNECTIVITY

Scroll to Top
Scroll to Top
Read previous post:
Raspberry-Pi-weather-station-project
Raspberry Pi weather station project

Makers and Raspberry Pi enthusiasts looking for inspiration for a new project to keep them busy over the next few...

Close