LTM8003 – 40VIN, 3.5A Step-Down μModule Regulator

Features

  • Complete Step-Down Switch Mode Power Supply
  • Wide Input Voltage Range: 3.4V to 40V
  • Wide Output Voltage Range: 0.97V to 18V
  • Wide Temperature Range: –40°C to 150°C (H-Grade)
  • 3.5A Continuous Output Current, 6A peak
  • FMEA Compliant Pinout Output Stays at or Below Regulation Voltage During Adjacent Pin Short or if a Pin Is Left Floating
  • Selectable Switching Frequency: 200kHz to 3MHz
  • External Synchronization
  • Low Quiescent Current: 25μA (5VOUT)
  • Programmable Soft-Start
  • Tiny, Low Profile 6.25mm × 9mm × 3.32mm RoHS Compliant BGA Package

LTM8003 - 40VIN, 3.5A Step-Down μModule Regulator

Description

The LTM®8003 is a 40VIN, 3.5A step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor, and all support components. Operating over an input voltage range of 3.4V to 40V, the LTM8003 supports an output voltage range of 0.97V to 18V and a switching frequency range of 200kHz to 3MHz, each set by a single resistor. Only the input and output filter capacitors are needed to finish the design.

The low profile package enables utilization of unused space on the bottom of PC boards for high density point of load regulation. The LTM8003 is packaged in a thermally enhanced, compact over-molded ball grid array (BGA) package suitable for automated assembly by standard surface mount equipment. The LTM8003 is RoHS compliant.

Applications

  • Automotive Battery Regulation
  • Power for Portable Products
  • Distributed Supply Regulation
  • Industrial Supplies
  • Wall Transformer Regulation

For More Details: LTM8003 – 40VIN, 3.5A Step-Down μModule Regulator

About The Author

Scroll to Top
Read previous post:
quaternion
Capturing IMU Data with a BNO055 Absolute Orientation Sensor

The Bosch BNO055 combines tri-axis accelerometers, gyroscopes, and magnetometers to provide orientation to users. About the Sensor The BNO055 uses...

Close