The solar energy collection is not that easy compared to the different types of power generation system because it has the lowest capacity factor. It has 5 out of 24 hours in a day that it can generate electricity from its solar collection. The only solution to this is by optimizing the 5 hours solar energy collection. This design features a solar tracker with Light-Dependent Resistor (LDR). The system is managed by a S08 MCU of Freescale. It has flash and RAM access protection that can be used in embedded development security. The system has its own protection such as illegal opcode detection with reset and illegal address detection with reset. It has also power-saving modes in which a peripheral clock-enable-register can disable the clocks of unused modules.
The design is comprised of a MC9S08PA16AVLC 8-bit MCU, S08 core, 16KB Flash that serves as the main controller of the system. It directs the movement of the servo motor with respect to the data gathered by the LDRs. It has four LDRs that will be able to locate accurately the solar radiation at its optimum point while behind these LDRs is the movable solar panel. The solar panel movement is handled by the servo motor that is also controlled by the MCU. The vertical servo is used to adjust the inclination of the panel while horizontal servo is used to adjust the horizontal position of the panel. The smart battery serves as the energy storage of the solar module that can trip off the supplies produced by the solar panel preventing it from overcharging.
For more detail: Optimized Solar Tracking System