Portable Raspberry pi with battery pack 2.0

This was my second project I have worked on for Instructables. I think I did a great job and I hope you do too.
For this project you will need:

Where I got them:
-Raspberry pie (with a case if possible)                                                                               Amazon.com
-LCD screen (Something to view what comes from you Raspberry pie)
-Key board and mouse (wireless is better)
-12 LED USB Desk Lamp and Fan.

Menards store
-Retractable USB to Micro USB Cable                                                                                   RadioShack store
-Portable Battery back up & Charger ZAGG
-USB wire from something that you don’t need( I got it form an old mouse)
-video wire

Portable Raspberry pi with battery pack 2.0
-something to carry you project
total cost of project around $200-300
I what to say thanks to RadioShack at

  • 2565 Sycamore Rd
  • Dekalb
  • (815) 787-0928
    They have great prices and things to make any project you can think of.

Step 1:

This is really important I put 12V to my LCD screen and I burned a fuse. I found out It only needs 6V to work.
First thing to do is convert the power cord from the LCD screen to allow for a USB connection to your Portable Battery back up & Charger from ZAGG..
Cut the wires to a good length, but not too short, just in case you mess up the splicing. I did not account for how much lenght I needed for the LCD.. You need to connect  red and black wires from the USB to the corresponding red and black on the LCD cord. I used alligator clamps to test the connections with my voltmeter. I was getting 5.15v  which was right voltage to power the LCD screen.Portable Raspberry pi with battery pack 2.0 schematic

Step 2:

Connect the Raspberry Pi to the Portable Battery back up & ZAGG charger with the USB to Micro USB Cable. Then connect the video wire to the LCD screen port and Raspberry pi port. Take the wire that you made for power, put the USB end into the Battery USB port and the other end into the LCD power port.
The 12 LED USB Desk Lamp and Fan was a great idea for the stand because it can be plugged in to the battery as well — and having a light and a fan with your computer is always nice.

 

For more detail: Portable Raspberry pi with battery pack 2.0


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top