Development Board – Kits Projects

14531 Pioneer Kit Add On Shield 01

Using the PSoC 6 Pioneer Board with the Pioneer IoT Add-on Shield

Introduction The PSoC 6 is the latest addition to Cypress’s powerful PSoC series of processors. The PSoC 6 Pioneer IoT Add-On Shield is the development tool associated with this processor line, sporting an onboard debugger, Arduino compatible headers, CapSense widgets, and more, all tied to a PSoC 6 processor. The processor is a dual-core device, with a […]

Using the PSoC 6 Pioneer Board with the Pioneer IoT Add-on Shield Read More »

35 NanoPi K1 Plus is a Raspberry Pi like computer with twice the RAM and a different CPU

$35 NanoPi K1 Plus is a Raspberry Pi-like computer with twice the RAM (and a different CPU)

FriendlyElec’s latest single-board computer looks like a Raspberry Pi 3 and has a lot of the same features, including a 40-pin header, WiFi, and a quad-core ARM Cortex-A53 processor. But while the Raspberry Pi 3 Model B+ uses a 1.4 GHz Broadcom BCM2837 system-on-a-chip, FriendlyElec’s NanoPi K1 Plus has a 1.3 GHz Allwinner H5 ARM processor

$35 NanoPi K1 Plus is a Raspberry Pi-like computer with twice the RAM (and a different CPU) Read More »

Touch Pi Portable Raspberry Pi

Touch Pi: Portable Raspberry Pi

Overview In this project we’re building a portable Raspberry Pi using the model A+, PiTFT 3.5” display, Powerboost 500C and a 2500mAh lithium polymer battery. We designed this very simple case in CAD – It’s a two part enclosure that’s fasten together with screws. All the components are panel mounted and fit nicely in a small

Touch Pi: Portable Raspberry Pi Read More »

Scroll to Top