I wanted a simple yet elegant panel that would display the current weather, my photostream from Flickr, The time and my iCal feeds Step 1: Configuring the Raspberry pi First we’ll setup the Raspberry Pi, to do this you’ll need to have Raspbian installed. You can buy a Pi with Raspbian pre-installed or you can […]
Raspberry Pi Media Panel Read More »
I recently finished a project to turn the Raspberry Pi into a music streamer. I had seen a couple of other projects here and here that were the same basic concept, so I knew it was possible (this is nothing new…just new for me), and I wanted to try to figure it out by myself.
Raspberry Pi Pandora Streamer Read More »
Description Package name: clap switch kit Kit Model: PSK-1 Operating voltage: 5V PCB size: 28 * 49mm How it works: Q1 and Q2 composed of two audio amplifier circuit, the audio signal is accepted by the MK1 C1 is coupled to the base of Q1 pole, amplified and fed directly from the collector to the
Clap Switch Suite/Electronic Production/DIY Kits Read More »
I am big fan of Raspberry pi and i am using it as NAS and torrent box among other things. I hate wire clutters and i only use my raspberry pi with putty, so i decided to make a little mod, so you can plug raspberry directly into AC socket. Step 1: Things you need
Raspberry pi “Power” case Read More »
Description This project was about a personal challenge that my Dad asked me to do it. Everything started more than one year ago when I was trying to do it with Arduino but I lost a lot of time because I couldn’t make everything works as fast as Raspberry does. I decided to move on
Webcam over 3G with Raspberry PI Read More »
Introduction Raspberry Pi is a widely used Arm development board and the Digilent Pmod interface is used to connect low frequency, low I/O pin count peripheral modules to host controller boards. This expansion board is a bridge to connect all kinds of Pmods to the Raspberry Pi. The board also provided much more useful features
RaspberryPi Universal Expansion Board Read More »
This instructable will show you how to quickly add Sugru Pi corners. Sugru molds like play-doh, then hardens into rubber. It sticks to most surfaces as it dries. We want to identify our placements to avoid closing off ports and add enough clearance so that the SD card can easily be ejected and solder pins
Sugru Raspberry Pi corners Read More »
The Raspberrypi is a board actually designed for helping computer education for remote schools but it is a good platform for programmers especially beginners to explore various coding techniques. Linux operating systems especially Ubuntu is preferred for all kind of programming and development. The Raspberrypi is a mini-computer board which is powerful enough to run
How to Send Message between Processes using Signal in Raspberry Pi Read More »
The project is a vintage radio shell with a raspberry pi and external speakers inside of it. This project came from my need to have a tasteful raspberry pi enclosure without it looking like a raspberry pi case. I also had the need for some medium quality stereo speakers for my room so I incorporated
Raspberry pi gone vintage Read More »
How the Software Works Here is a quick overview of how the current software works from startup to shutdown. All the code is open source, so you can browse through it here. Below is a basic flowchart. Step One: Startup Andy To start Andy, flip the switch on the back of him. This allows current to
ANDY: A Multi-Purpose “Humanoid” Robot Read More »
