Projects

Using Phidgets on a Raspberry Pi 2

Using Phidgets on a Raspberry Pi 2

Hello Makers, In this instructable I will be showing you how to prepare a Raspberry Pi2 for use with a Phidgets Interfacekit 8/8/8 The Products from Phidgets allow you to connect sensors an actuators to your pc/pi/mac through the usb port. Most of the sensors do not require any soldering. http://www.phidgets.com/ There are plenty of

Using Phidgets on a Raspberry Pi 2 Read More »

Home Raspberry Pi Project

Home Raspberry Pi Project

I just received a shiny, brand-new Raspberry Pi in the mail today! I’ve only been playing around with it for an hour or so but I already love this little device! It only took me about 30 minutes to go from unwrapping to running, which is very impressive for what is essentially an embedded development

Home Raspberry Pi Project Read More »

Motion Detection Alarm System

Motion Detection Alarm System

A basic USB camera can be used to detect motion in a room. In the following steps we will show you how you can use Reactive Blocks to program a ready to run Java application that sends SMS when motion is detected. With Reative Blocks you make Java SE applications so the alarm application can

Motion Detection Alarm System Read More »

Blinking LED using 8051

Blinking LED using 8051

This is the first project regarding 8051 and of course one of the simplest, blinking LED using 8051. The microcontroller used here is AT89S51 In the circuit, push button switch S1, capacitor C3 and resistor R3 forms the reset circuitry. When S1 is pressed, voltage at the reset pin (pin9) goes high and this resets

Blinking LED using 8051 Read More »

Scroll to Top