If your Raspberry Pi 4 projects are making the mini PC run a little hotter than expected, you may be interested in a new video created by Christopher Barnatt over at Explaining Computers. Following on from creating his very own custom cooling solution for the Raspberry Pi 4 mini PC. Christopher has also put a couple of Raspberry Pi active cooling solutions to the test, unboxing and using the Pimoroni Fan SHIM, 52Pi ICE Tower Cooler, and Noctua 40mm fan in 3D printed mount.
The video embedded below includes Sysbench CPU stress tests, and comparison of results with passive cooling in Christopher’s earlier Raspberry Pi 4 Cooling video also available via his excellent “YouTube” channel.
Shortly after the launch of the Raspberry Pi 4 the official Raspberry Pi Foundation rolled out a new firmware update to bring the temperature of the mini PC down a little more, but actively cooling the mini PC is a great way to help get more from your processor.
Raspberry Pi 4 Specifications :
1.5GHz 64-bit quad-core ARM Cortex-A72 CPU ( ARM v8, BCM2837)
1GB, 2GB or 4GB RAM (LPDDR4)
On-board wireless LAN – dual-band 802.11 b/g/n/ac
On-board Bluetooth 5.0, low-energy (BLE)
2x USB 3.0 ports, 2x USB 2.0 ports
Gigabit ethernet
Power-over-Ethernet (requires additional Raspberry Pi PoE HAT )
40-pin GPIO header
2Ă— micro-HDMI ports (up to 4Kp60 supported)
H.265 (4Kp60 decode)
H.264 (1080p60 decode, 1080p30 encode)
OpenGL ES, 3.0 graphics
DSI display port, CSI camera port
Combined 3.5mm analog audio and composite video jack
Micro-SD card slot
USB-C power
