RASPBERRY PI CLUSTER SHOWS YOU THE ROPES

Raspberry Pi clusters are a common enough project, but a lot of the builds we see focus on the hardware side of the cluster. Once it’s up and running, though, what comes next? Raspberry Pis aren’t very powerful devices, but they can still be a great project for learning how to interact with a cluster of computers or for experimental test setups. In this project from [Dino], four Pis are networked together and then loaded with a basic set of software for cluster computing.

The first thing to set up, after the hardware and OS, is the network configuration. Each Pi needs a static IP in order to communicate properly. In this case, [Dino] makes extensive use of SSH. From there, he gets to work installing Prometheus and Grafana to use as monitoring software which can track system resources and operating temperature. After that, the final step is to install Ansible which is monitoring software specifically meant for clusters, which allows all of the computers to be administered more as a unit than as four separate devices.

This was only part 1 of [Dino]’s dive into cluster computing, and we hope there’s more to come. There’s a lot to do with a computer cluster, and once you learn the ropes with a Raspberry Pi setup like this it will be a lot easier to move on to a more powerful (and expensive) setup that can power through some serious work.

Source: RASPBERRY PI CLUSTER SHOWS YOU THE ROPES

About The Author

Scroll to Top
Read previous post:
I²CMINI-–-A-TINY-USB-TO-I²C-BRIDGE-THAT-IS-COMPATIBLE-WITH-I²CDRIVER
I²CMINI – A TINY USB TO I²C BRIDGE THAT IS COMPATIBLE WITH I²CDRIVER

I²CMini is a USB to I²C bridge. It can drive and monitor I²C traffic and measures just 18 mm square....

Close