The RPi Internet Weather Station project displays the weather information such as temperature, humidity and successive weather forecast.
The Raspberry Pi Internet Weather Station project displays the weather information such as temperature, humidity and successive weather forecasts. This project uses 4D Systems’ 4DPi-35-II. 4DPi-35-II acts as the primary display of this RPi Project.
The 4DPi-35-II is a 3.5″ 480×320 Primary Display for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-35-II to function with the Raspberry Pi without the need for a mouse.
Communication between the 4DPi-35-II and the Raspberry Pi is interfaced with a high speed 48Mhz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression, and features a customised DMA enabled kernel.
The 4DPi-35-II is designed to work with the Raspbian Operating System running on the Raspberry Pi, as that is the official Raspberry Pi operating system. It also supports the new PIXEL addition to Raspbian. …Know more
- Raspberry Pi 3
- Software • Python-tk module • Pywapi (Python weather API) • Raspberry Pi Internet Weather Station by Jim
Step1: Set Up
- Connect the 4DPi-35 to Raspberry Pi 3.
- Recommended application to use for SSH connection: Mobaxterm – https://mobaxterm.mobatek.net/download-home-edition.html Steps in Raspberry Pi Weather Station
- Install the latest raspbian OS that is available on the Raspberry Pi website . Follow the installation guide.
- Set up network connections (https://www.raspberrypi.org/documentation/configuration/wireless/README.md), Enable SSH (https://www.raspberrypi.org/documentation/remote-access/ssh/README.md), change password and restart.
- Connect to SSH, download and install the 4DPi-Kernel. Follow the instruction on the 4DPi-35 II Datasheet.
- When installation is successful, connect thru SSH and download python weather api.
- wget https://launchpad.net/python-weather-api/trunk/0.3.8/+download/pywapi-0.3.8.tar.gz
- When download is complete. Untar the file
- sudo tar -xzvf pywapi-0.3.8.tar.gz
- Go to the folder
sudo python setup.py build
sudo python setup.py install
- Go back to the folder /home/pi
- Reconfigure tzdata
- Download he Raspberry Pi Internet Weather Station by
- Unzip the file
sudo unzip FAQ7BWLI1NULEIL.zip
- Go to the folder
- Open the file weather.py
- sudo nano weather.py
- Look for the line # Larger Display and put “”” before the line to uncomment and look for the line tmdateYPosSm = 8 # Time & Date Y Position Small and delete the “”” below. This will use the small display. It should look like the code below.
# Larger Display
self.xmax = 800 - 35
self.ymax = 600 - 5
self.scaleIcon = True # Weather icons need scaling.
self.iconScale = 1.5 # Icon scale amount.
self.subwinTh = 0.05 # Sub window text height
self.tmdateTh = 0.100 # Time & Date Text Height
self.tmdateSmTh = 0.06
self.tmdateYPos = 10 # Time & Date Y Position
self.tmdateYPosSm = 18 # Time & Date Y Position Small
# Small Display
self.xmax = 480 - 20
self.ymax = 320 - 5
self.scaleIcon = False # No icon scaling needed.
self.iconScale = 1.0
self.subwinTh = 0.065 # Sub window text height
self.tmdateTh = 0.120 # Time & Date Text Height
self.tmdateSmTh = 0.075
self.tmdateYPos = 1 # Time & Date Y Position
self.tmdateYPosSm = 8 # Time & Date Y Position Small
- Look for the line
w = pywapi.get_weather_from_weather_com( '48085', units='imperial' )
- And change with
self.w = pywapi.get_weather_from_weather_com(‘ASNS0055’, units='metric' )This will change to the desired location by replacing the value ‘48085’ to ‘ASNS0055’and the units to be use from ‘imperial’ to ‘metric’. You can find your location by visiting weather.com.
- Save the file,
- Ctrl + x Press Y, and enter.
- Test the file by typing,
- If all are correct, set to run after boot up. Edit the file .bashrc, this will be executed when you open the terminal. Go to the bottom of the file and add the lines below. Save and exit.
- Then we need to open the terminal after the raspberry pi boots up. To do this type the code below.
sudo nano .config/lxsession/LXDE-pi/autostart
- Go to the bottom of the last line and add the line below. Save and exit.
Low cost PCB at PCBWay - only $5 for 10 PCBs and FREE first order for new members
PCB Assembly service starts from $30 with Free shipping all around world + Free stencil
Extra 15% off for flex and rigid-flex PCB