Swift 3.0 on Raspberry Pi! Hello Swifty World

Contents hide

1 Swift is now Open Source!

2 Swift 3.0 on the Raspberry Pi.

3 Step One – Prepare the Raspberry Pi for Swift.

4 Step Two – Install Swift 3.0

5 Hello Swifty World – Your first project.

6 SPECIAL NOTE FOR RASPBIAN STRETCH

Learn how to install Swift 3.0 on your Raspberry Pi. Create and run your first Swift Project “Hello Swifty World!”

Swift is now Open Source!

What does this mean? It means that now thanks to the hard work of many people, we can now use Swift on many different platforms and devices. From Mac OSX machines to Linux Servers and many other SBC and IOT devices including Raspberry Pi's, BeagleBones and Chips.

Swift 3.0 on the Raspberry Pi.

In this project we will learn how to install Swift 3.0 on the Raspberry Pi. The version of Swift we will be using has been built to be compatible with all versions of the Raspberry Pi running the latest Raspbian “Jessie” operating system and is called Swift-Lite. Swift-Lite is a full version of Swift 3.0 but does not include the “Package Manger”, “REPL” or “LLDB”. Swift-Lite includes a special build pre-processor called “swift-lite-build” to allow the easy building of multi-file swift projects. For more info go to www.swift-lite.org.

Step One – Prepare the Raspberry Pi for Swift.

Before we install Swift we need to prepare our Raspberry Pi and install some dependancies.

NOTE: It is always a good idea to make a backup of your SD card before starting a new project.

Open a new Terminal Window.
Check you have the latest Raspian Jessie installed.
(see SPECIAL NOTE if you have Raspbian Stretch installed)
Run update

sudo apt-get update

Swift requires the installation “Clang”. Clang is a compiler front end for the programming languages C, C++, Objective-C, Objective-C++, OpenMP, OpenCL, and CUDA. It uses LLVM as its back end.
Install clang.

sudo apt-get install clang

Step Two – Install Swift 3.0

Download the Swift install file.

wget https://s3-us-west-2.amazonaws.com/swiftpi.swiftlite.v1/swift-lite-3.0-raspberrypi-universal.tar.gz

Unzip (tar) Swift.

sudo tar -xzpf swift-lite-3.0-raspberrypi-universal.tar.gz -C/

Remove install file.

$ rm swift-lite-3.0-raspberrypi-universal.tar.gz

Thats it Swift 3.0 is installed!

Hello Swifty World – Your first project.

First lets create a directory for our Swift projects.

mkdir swiftProjects

Change to the new directory.

cd swiftProjects

Create a new .swift project file.

nano helloworld.swift

This will open the text editor so we can add some code. You can use any plain text editor to create and edit swift code.
Add the following code – print(“Hello, swifty world!”)

GNU nano 2.2.6                                 File: helloworld.swift 
print("Hello, swifty world!")

control – x to close the text editor. Answer yes to save the file.
To build the swift project we will use “swift-lite-build” followed by the project file name.

swift-lite-build helloworld.swift

“swift-lite-build” will build the swift project and create an executable file with a .swapp extension. In the terminal we should see the following result.

swift-lite-build helloworld.swift
Processing Files 
Building! 
Build Finished

List the directory to see the new build file.

ls
helloworld.swapp helloworld.swift

To run your Swift swapp enter the following command, press enter and we should see “Hello, swifty world! “.

./helloworld.swapp
Hello, swifty world!

Congratulations you have just created, built and run your first Swift project on a Raspberry Pi!

SPECIAL NOTE FOR RASPBIAN STRETCH

If you have installed Raspbian Stretch you may get the following error.

swift-lite-build: error while loading shared libraries: libicuuc.so.52: cannot open shared object file: No such file or directory

This is because Swift is looking for libicuuc.so.52 and Raspbian Stretch only includes libicuuc.so.57.

To fix this we need to install libicuuc.so.52 by following these instructions.

Step 1 – download the package.

wget https://s3-us-west-2.amazonaws.com/swiftpi.swiftlite.v1/libicu52_52.1-8_armhf.deb

Step 2 – unpack the package.

sudo dpkg -i libicu52_52.1-8_armhf.deb

Step 3 – Cleanup by removing package.

rm -rf libicu52_52.1-8_armhf.deb

That should fix the error.

In the next tutorial we will expand helloworld to include a Swift Module file and start using “Foundation”.

Source: Swift 3.0 on Raspberry Pi! Hello Swifty World – Part 1

About The Author

Muhammad Bilal

I am highly skilled and motivated individual with a Master's degree in Computer Science. I have extensive experience in technical writing and a deep understanding of SEO practices.