My father-in-law is a musician and a lover of mid-century modern design. I have an obsession with tinkering. Somewhere in that mix lies the perfect gift and the perfect challenge. After taking a couple of trips to antique stores and reading a few Intructables, I came to the conclusion that I should turn an old […]
Antique Radio into an Airplay Speaker Read More »
Vintage tube radios are nostalgic. The crackle of the game on the after dark high powered AM station from 500 miles away. The smell of the tubes and the warmth of the tones. They remind us of simpler times. Times when families sat together – not blankly staring unengaged at the TV, bur rather talking,
Raspberry Pi AirPlay Tube Radio Read More »
Let’s make a bluetooth audio receiver allowing you hook up your R-Pi to your stereo and use your phone as the sound source. To be honest, this is not a unique project. Plenty of people have attempted to get a bluetooth receiver working, some (less) have succeeded. After spending way to much time on trying
Raspberry Pi Bluetooth+Airplay Audio Receiver combo Read More »
Today I am going to show you how to setup your Raspberry P (Model B or A (With Ethernet adapter) as an Airplay receiver. It is very simple to do and will not take much time at all. Step 1: Materials (Sorry for the bad picture quality, it gets better) To get the receiver set
Raspberry Pi: Airplay Reciever Read More »
Hello, In this instruct able, I will be showing you how to make a raspberry pi airplay server.To start off, you will need to get a raspberry pi. The model A, B or B+ will work.To allow the raspberry pi to run, you will need to format an SD card. First of all go to
PiPlay a raspberry pi aiplay server Read More »
Most ways to stream music to multiple sets of speakers cost more than it is worth. I don’t think I have to say much about it, you probably wanted to do this in the past but it just seemed stupid to spend that much money on a separate dedicated system. We are going to exploit
Airplay Multiroom radio with the Raspberry Pi, no additional hardware needed. Read More »
Before I started working for Pelagicore I won two Raspberry Pi’s (short RP) which they sponsored. One because I was one of the first people on the foss-gbg mailinglist which they started. It is for people from Gothenburg and surroundings who would like to join others and talk about open source stuff in Gothenburg. And
AirPlay Radio with Raspberry Pi and WiFi Read More »
Hey, Welcome to my first ever post on Instructables! The Project you’re about to read over is setting up a Raspberry Pi to use ‘AirPlay’ and how I used it, which clashes with the second part, the new life for my old radio. Step 1: Collect up everything you need. Whats a must for this
Dual Project: AirPlay-Pi and new life for an old radio Read More »
