battery Archives - Page 9 of 17 - Raspberry PI Projects

RAKWIRELESS RAK4260 IS A TINY LORAWAN MODULE BASED ON MICROCHIP SAMR34 LORA SIP

Rakwireless has just announced a new module part of their LPWAN family: RAK4260 LoRaWAN module based on Microchip ATSAMR34J18B LoRa SiP and at just 15x15x1.2 mm, one of the smallest LoRaWAN modules in the market. The new module is cheaper than the company’s earlier RAK811 module and consumes less power at just 790 nA in sleep mode. The company also provides a RAK4260 evaluation […]

RAKWIRELESS RAK4260 IS A TINY LORAWAN MODULE BASED ON MICROCHIP SAMR34 LORA SIP Read More »

Embedded System to Detect Wildfire

Creating a system in order to detect wildfire using deep learning programmation on a Raspberry Pi 4 and a Wisol module by Sigfox. Hello everyone ! Before explaining in details our project and its setup, we wanted to tell you that it is a student project carried out in a shot relatively short time. So

Embedded System to Detect Wildfire Read More »

ADVANCED AND SCALABLE SOM-HMI SOLUTIONS FOR EV CHARGING STATION

Technology is continuing to transform the automotive industry, particularly the EV segment. The decrease in battery cost and increase in battery capacity, coupled with other advantages such as zero-emission, noiseless operation, and overall cost savings have led to EVs becoming mainstream in India and globally. At the same time, more and more EV charging stations

ADVANCED AND SCALABLE SOM-HMI SOLUTIONS FOR EV CHARGING STATION Read More »

Raspberry Pi Compute module transformed into mini-ITX motherboard

Over:Board is a new piece of hardware specifically created to transform the small Raspberry Pi Compute module into a mini-ITX motherboard. Now available via the Indiegogo crowdfunding website the Over:Board motherboard is priced from £199 and will start shipping out tobaccos during March 2021. Hi, I’m Ross and I am a qualified software and hardware

Raspberry Pi Compute module transformed into mini-ITX motherboard Read More »

SEEED OPENS PRE-ORDERS FOR NPI I.MX6ULL DUAL-ETHERNET DEV BOARD

SeeedStudio recently announced that they have started taking pre-orders for their new NPi i.MX6ULL – Linux SBC Development boards. The board is a low-power, linux-based single board computer and can be referred to as essentially a breakout board on steroids for the i.MX6ULL COM (Computer-on-module) chip. It is targetted at industrial applications with several features that support industrial

SEEED OPENS PRE-ORDERS FOR NPI I.MX6ULL DUAL-ETHERNET DEV BOARD Read More »

RTC Module – Super Capacitor

PRODUCT DETAILS This product is discontinued, please consider the Raspberry Pi RTC Expansion Module v1.1 as an alternative. This is a Super Capacitor Real-Time Clock module, it design for Raspberry Pi, but it also can be used to Arduino. Pluging it into Raspberry Pi GPIO interface, and all is ok. This is the easiest way to keep

RTC Module – Super Capacitor Read More »

Raspberry Pi A+&B+&2 GPIO Reference Board

PRODUCT DETAILS Introduction ： The GPIO Reference board is specifically designed for Raspberry Pi. The Raspberry Module B+ increased to 40 GPIO. It’s difficult to remember the order of the new GPIO and functions. So we make this GPIO Reference board , making the majority user of Raspberry Pi B+ easily identify GPIO . Compatible

Raspberry Pi A+&B+&2 GPIO Reference Board Read More »

Arduino Adapter For Raspberry Pi

PRODUCT DETAILS Arduino is a massive ecosystem, if there’s a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for this. What’s more, the ARPI600 also support XBee modules, make it easy

Arduino Adapter For Raspberry Pi Read More »

Raspberry Pi RTC Expansion Module v1.1

PRODUCT DETAILS The RTC module is specifically designed for Raspberry Pi. It communicated with Raspberry Pi through I2C bus. There is a Maxim DS1307 and CR1220 button cell on the board to keep the real time for a long time after the Raspberry Pi has it’s power off. In order to offering a convenient way

Raspberry Pi RTC Expansion Module v1.1 Read More »

LTE Cat 1 Pi HAT (USA – VZW)

PRODUCT DETAILS Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series. It compatible with Raspberry Pi 1 Model B+ and later versions. LTE CAT.1 Pi HAT is designed for LTE Category 1 networks and with 2G fallback(EU version only). Embedding common protocols, like TCP/UDP,

LTE Cat 1 Pi HAT (USA – VZW) Read More »