erial port to the Raspberry PI and breaks out some of the PI’s pins for experimentation. The interface board was designed to be simple and used for initial experimentation. It can be built on a single-sided PCB using home-made PCB fabrication methods. KiCad source files are provided so that the design can be modified if …
I have always wanted to access the Rapsberry PI Gpio pins in a safer manner. Those are not 5V tolerant, and need a level shifter. I came across this really nice level translator chip from TXB0108 from Texas Instruments. It is a bidrectional 3.3 to 5v logic level translator in a really tiny package. The …
Howdy Y’all Back when I was working on the Raspberry Pi portable emulator that became the backseat system. I thought that I would want to use an analog joystick like several of the other builds. However I was trying to get it to work via the GPIO instead of USB bus. Unfortunately mid build I …
This instructable is video game of breakout on RaspberryPi. It is easy to make this video game. Let’s make and fun!! Step 1: Materials 1. RaspberryPi (I used RasberryPi rev2) ※include keyboard,mause,monitor,SDcard 2. Tact switch × 4 3. Electrical resistor × 4 4. Some jumper wires 5. Breadboard Step 2: Making controllor Firstly,you will make …
