cable Archives - Page 2 of 2 - Raspberry PI Projects

Build a Raspberry Pi-Based Cable Shutter Release for Sony Cameras

Replacing a simple and inexpensive remote cable release for your camera with Raspberry Pi may seem like a classic case of over-engineering, but using the tiny machine to control the camera opens up a whole new world of photographic opportunities. Using a simple Python script, you can turn Raspberry Pi into a powerful and flexible intervalometer or trigger …

Build a Raspberry Pi-Based Cable Shutter Release for Sony Cameras Continue Reading

Camera control via shutter release cable

Many cameras have a 2.5mm audio jack in the side for a remote shutter release cable, and it can be used to wake up the camera if it has gone into power-save move and also take pictures. For now, I have only tested this against the Canon Rebel XSi, but it looks like the same …

Camera control via shutter release cable Continue Reading

Raspberry Pi GPIO Expansion Cable from a Used IDE Cable

Rev B of the raspberry Pi ships with a 26 pin GPIO port and my first dilemma after bringing up my Pi was, how was I going to break out the PI’s GPIO pins so that I could easily access them for design work? I searched on-line and found several solutions but all of them …

Raspberry Pi GPIO Expansion Cable from a Used IDE Cable Continue Reading

A Really Inexpensive Raspberry Pi GPIO cable

This instructable can be accessed at the author’s website – http://www.neatinformation.com/howto/Pi%20GPIO.html. If you link to this instructable from another website, please include a link to the Neat Information website. The project described in this article requires basic mechanical and electronics skills and is provided for information purposes. Do not attempt to replicate it or use …

A Really Inexpensive Raspberry Pi GPIO cable Continue Reading