current

GALVANIC ISOLATED 8 CHANNEL HIGH SIDE SWITCH 0.6A PER CHANNEL

GALVANIC ISOLATED 8 CHANNEL HIGH-SIDE SWITCH (0.6A PER CHANNEL)

This project provides 8 fully protected and isolated high-side power switches that are able to handle current up to 625 mA. An 8-bit parallel microcontroller compatible interface allows connecting the inputs directly to a microcontroller or standalone circuit system. The input interface also supports direct control mode and is designed to operate with 3.3/5V CMOS compatible levels. The […]

GALVANIC ISOLATED 8 CHANNEL HIGH-SIDE SWITCH (0.6A PER CHANNEL) Read More »

TMCS1107 420 V ISOLATED HALL EFFECT CURRENT SENSOR

TMCS1107 420 V ISOLATED HALL-EFFECT CURRENT SENSOR

Texas Instruments’ sensor is optimized for high accuracy and temperature stability Texas Instruments‘ TMCS1107 is a galvanically isolated Hall-effect current sensor capable of DC or AC current measurement with high accuracy, excellent linearity, and temperature stability. A low-drift, temperature compensated signal chain provides <3% full-scale error across the device temperature range. The input current flows through an internal 1.8

TMCS1107 420 V ISOLATED HALL-EFFECT CURRENT SENSOR Read More »

MAXIM INTEGRATED MAX38650 NANOPOWER BUCK CONVERTER

MAXIM INTEGRATED MAX38650 NANOPOWER BUCK CONVERTER

Maxim Integrated MAX38650 nanoPower Buck Converter provides an ultra-low 390nA quiescent current and operates from a 1.8V to 5.5V input voltage. The MAX38650 supports load currents of up to 100mA with peak efficiencies of 95%. The MAX38650 offers high efficiency throughout the load range with a small total solution size. The device is ideal for battery applications where extended battery life

MAXIM INTEGRATED MAX38650 NANOPOWER BUCK CONVERTER Read More »

FOR HIGHER POWER DENSITY AND REDUCED BOM MELEXIS MLX91220 21 CURRENT SENSORS AT RUTRONIK

FOR HIGHER POWER DENSITY AND REDUCED BOM: MELEXIS MLX91220/21 CURRENT SENSORS AT RUTRONIK

Minimize thermal losses: With the MLX91220 and MLX91221, Melexis presents two integrated current sensors for AC and DC measurements with an analog interface. These are isolated integrated Hall-effect current sensors with 0-50A and dual OCD (overcurrent detection). This all-in-one solution offers an optimal symbiosis of small size, low impedance, high bandwidth and isolation. Dual on-chip

FOR HIGHER POWER DENSITY AND REDUCED BOM: MELEXIS MLX91220/21 CURRENT SENSORS AT RUTRONIK Read More »

LITTLE BEE AFFORDABLE HIGH PERFORMANCE CURRENT MAGNETIC FIELD PROBE

LITTLE BEE, AFFORDABLE HIGH-PERFORMANCE CURRENT & MAGNETIC FIELD PROBE

A campaign for a current probe called Little Bee was launched on Crowdsupply. Little Bee is an affordable and high-performance current probe and magnetic field probe that enables you to debug and analyze electronic devices more effectively. This device comes in handy because current probes available today are expensive, therefore having a limited number of users. Current probes

LITTLE BEE, AFFORDABLE HIGH-PERFORMANCE CURRENT & MAGNETIC FIELD PROBE Read More »

MELEXIS EXPANDS IMC HALL® CURRENT SENSOR PORTFOLIO EXCEEDING MEASUREMENT

MELEXIS EXPANDS IMC-HALL® CURRENT SENSOR PORTFOLIO EXCEEDING MEASUREMENT

Melexis, a global microelectronics engineering company, has introduced the MLX91216 XHF extra high-field current sensor, extending the ease and accuracy of its unique IMC-Hall® technology into high-current measurement for emerging automotive applications. Capable of measuring current to beyond 2000 A, the MLX91216 XHF is suited to redundant monitoring of battery-management systems (BMS), over-current detection in smart fuses,

MELEXIS EXPANDS IMC-HALL® CURRENT SENSOR PORTFOLIO EXCEEDING MEASUREMENT Read More »

Scroll to Top