There is not much documentation on Pi Face Digital 2 board for the Raspberry PI. I could not find any on how to interface it to Windows 10, so I thought I’d nut the software out myself. You can find some operating instructions here, and a very good linux operating guide here. I used the data sheet for […]
PiFace Digital 2 Windows IOT driver (with events) Read More »
The emerging trend of smart lighting and Internet of Things, requires a new generation of LED drivers. InfineonTechnologies AG introduces the new member of its XDP LED series, the XDPL8221 for cost-effective dual-stage drivers with advanced features. This device combines a quasi-resonant PFC and a quasi-resonant flybackcontroller with primary side regulation together with a communication interface. A comprehensive set of configurable protection
INFINEON TECHNOLOGIES XDPL8221 DIGITAL PFC+FLYBACK CONTROLLER Read More »
Windows IoT Core on RPi 3 running two stepper motors using DRV8825 stepper motor drivers. There are two examples to use DRV8825. Things used in this project Hardware components Story Connect two DRV8825 to RPi. No.1: GPIO26 to DIR, GPIO19 to STEP, 5V to RESET and SALEEP, GND to GND. No.2: GPIO 13 to
DRV8825-Stepper-Motor-Driver-on-RPi-3-Win10-IoT Read More »
Infineon Technologies is launching the IFX007T NovalithIC™ motor driver for industrial applications. The IFX007T smart half-bridge provides an easy and efficient way to drive brushed and brushless motors, integrating a p-channel high-side MOSFET, an n-channel low-side MOSFET and a driver IC into one package. Along with a microcontroller and power supply, no other devices are
New Infineon IFX007T – An easy-to-use high power motor driver Read More »
Bipolar stepper drive board described here has been designed around TB6600HG IC. The TB6600HG is PWM chopper type single chip bipolar sinusoidal micro-step stepping driver. Maximum Load 4.5A, Supply 10V to 42V DC. Features Based on Single chip and Second chip for auto half current control Suitable for Nema17, Nema23, Nema34 bipolar stepper motors Suitable
4.5Amps Bipolar Stepper Motor driver based on TB6600 Read More »
The subject here is connecting the Raspberry Pi to a MM5451 LED display driver. This is written in Python to demonstrate bitwise programming and shift register operation. Using only two input pins (clock and data) for serial date input produces 35 open drain outputs. The 35 outputs are 15mA sink. The MM5451 comes in a
Connect-Program Raspberry Pi and a MM5451 LED Display Driver Read More »
This add-on board enables a Raspberry Pi B+, A+, or Pi 2 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but
Pololu Dual MC33926 Motor Driver for Raspberry Pi (Partial Kit) Read More »
This motor driver kit and its corresponding Python library make it easy to control a pair of bidirectional, brushed DC motors with a Raspberry Pi Model B+. The expansion board features Texas Instruments’ DRV8835 dual H-bridge motor driver IC, which allows it to operate from 1.5 V to 11 V and makes it particularly well suited for driving
Motor Driver DRV8835 (for Raspberry Pi) Read More »
