The purpose of this tutorial is to evaluate the performance of the affordable RPLiDAR A1M8 from Slamtec using ROS Noetic on a Raspberry Pi. ROS is a package of software libraries and tools for the construction and creation of robotic systems and applications. At the current timeframe, ROS Noetic is a version of ROS developed […]
LiDAR integration with ROS Noetic on Raspberry Pi OS Read More »
High contrast applications (day to night) require high dimming ratios, and ADI’s LT3950 provides up to 20,000:1 dimming ratio, providing high dynamic range dimming for day/night vision. The flexibility to combine with analog input dimming provides accurate LED brightness control and eliminates the need for a microcontroller. The LT3950 is a multi-topology DC/DC converter designed specifically to drive
The SynthUSB3 is an innovative, low-cost, pocketable RF signal generator – software-tunable from 12.5MHz to 6.4GHz in 0.1 Hz steps Saelig Company Inc. announces the Windfreak Technologies SynthUSB3 – a pocketable 12.5MHz to 6.4GHz software-tunable RF signal generator and frequency sweeper that can be controlled and powered by any device running Windows, Linux or Android via a USB port.
COMPACT SYNTHUSB3 6.4GHZ MICROWAVE SIGNAL GENERATOR Read More »
The T3AWG3252’s analog/digital synchronized output represents a valuable tool to simulate, troubleshoot, or validate digital designs. Saelig Company, Inc. has introduced the Teledyne LeCroy T3AWG3252 Multifunctional 16-bit Arbitrary/Function Generators that are designed with an innovative architecture that features synchronized analog signal and digital pattern generation. This multifunction 250MHz arbitrary/sweep/function generator combines multiple functions in a single
The Teledyne LeCroy T3DSO200 100-500MHz scopes provide a minimum vertical input range of 1mV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 500,000wfms/sec (sequence mode). Saelig Co. Inc. has introduced the Teledyne Test Tools T3DSO2000A Oscilloscopes which are available in two channel and four channel versions with
T3DSO2000A SERIES ADVANCED 500MHZ OSCILLOSCOPES Read More »
The all-in-one DT71 Mini Digital Tweezers is a measuring tool with full differential input measurement, capable of functioning as an LCR / ESR meter, a digital multimeter, or/and an SMD Tester. Design with innovation and the highest user experience intentions, the DT71 subvert the appearance restrictions of traditional measuring instruments. It is compact by design and has a unique trinary structure
DT71 MINI DIGITAL TWEEZERS Read More »
RF testing is getting quite popular these days, with many devices featuring wireless capabilities. However, RF test devices are quite expensive, therefore slowing down it’s popularity. However, there’s a new RF test device in town which is very affordable, called the TinySA. Under development since February, the RF is now available for pre-order. The tinySA is
HUGEN LAUNCHES PORTABLE TINYSA SPECTRUM ANALYSER Read More »
Salland Engineering delivers over 28 years of services to develop and build custom ATE instruments for the semiconductor industry. CEO, Paul van Ulsen said; Building high density instruments is always about finding the right balance between performance, density/throughput within the right available power and cooling at the right cost per channel. To address these challenges,
SE-DPIN: 16 TO 256 CHANNEL I/O CARD FOR PXIE AND ATE INSTRUMENTS Read More »
For makers and electronics engineers, the oscilloscope is one of the most important tools in the lab. It is a test instrument for visualizing and observing various signals usually as a two-dimensional plot of signals against time. Apart from being used to view and compare waveforms in the design and debugging of electronic systems, the
A SIMPLE MINIATURE DIGITAL STORAGE OSCILLOSCOPE POWERED BY AN STC MCU Read More »
Makers and hobbyists looking for a project to keep them busy this weekend may be interested in a new Raspberry Pi DIY weather station. Built using a little Arduino and Raspberry Pi hardware the weather station features a Arduino Nano 33 BLE and Raspberry Pi 4 Model B together with a DFRobot I2C Ozone Sensor. The anemometer used
Raspberry Pi weather station complete with air quality Read More »
