In this tutorial we will look at how to setup up your raspberry pi to take picture of the intruder who enters your home and send an email to you whenever you are not at your home. Step 1: What You’ll Need Raspberry Pi running Raspbian USB Camera PIR Sensor USB Wi-Fi Module for internet […]
Home Security Email Alert System using Raspberry Pi Read More »
Hello, In this instructable, I will be showing you how to make a small CCTV system using the raspberry pi. I have wanting to do this for a while and have now got round to doing it! For this build, you will need the following: 1. A raspberry pi (Model B or later) 2.A webcam
Raspberry Pi Home CCTV System Read More »
A node.js based home automation system based around the Raspberry Pi. For background around this project: Installation To get started, clone the repository and install the required dependencies. git clone https://github.com/anders94/raspberry-pi-home-automation.git cd raspberry-pi-home-automation npm install Hardware The Raspberr Pi needs a little bit of circuitry to protect and amplify its GPIO ports. Here’s schematics of
raspberry-pi-home-automation Read More »
Looking at the Raspberry Pi Cobbler in Adafuit’s wonderful collection of RPi accessories, I decided that it would be a much better method of connecting the the RPi GPIO to a breadboard than an old IDE cable with wires stuck in the end. I didn’t think I could justify paying $8 plus shipping to the
Home-Made Raspberry Pi Cobbler Read More »
Hi Fellow makers, This is my first Instructable on Home Automation. The idea is to build a controller and wireless nodes to control and monitor. After a lot of hit and trial with many different controllers like OpenHab, DomotiGa, Ago Control, finally I decided to go with Domoticz as Controller and MySensor for Nodes. You
Home Automation using Raspberry Pi, Arduino, Domoticz, MySensors. Read More »
How Does it Work The main brain for this project is Arduino UNO Board along with Arduino Ethernet Shield to give it a wireless connectivity.Arduino runs a code to control a Relay board according to the input and also serves a web page through which respective output to the relay board can be controlled.Through relay
Open Source Home Automation Project using Arduino UNO + Ethernet Shield Read More »
Step 1: Components list The Particle Core (a.k.a. Spark Core) module This comes in a nice little kit with a breadboard and USB lead. You can buy one direct from Particle at https://store.particle.io/, from Adafruit, or in the UK the cheapest I’ve found is from CPC. There are two versions of the Core – one
Internet-connected home energy monitor Read More »
I just received a shiny, brand-new Raspberry Pi in the mail today! I’ve only been playing around with it for an hour or so but I already love this little device! It only took me about 30 minutes to go from unwrapping to running, which is very impressive for what is essentially an embedded development
Home Raspberry Pi Project Read More »
This device is a home automation lighting solution based on the presence of a person inside the room. When a person enters or leaves the room, the circuit automatically turns the lights of a room ON and OFF respectively. It also has a memory element which eliminates undesired switching of the lights in the event
Home Automation Lighting Control Read More »
In this instructable I will detail my methods for creating a fully custom Home Security and Automation System. This is a work in progress, and as I will be adding to it as I go. For now I will provide a breakdown of the goals of this project. 1) The system should be fully modular.
DIY Home Security and Automation with Raspberry Pi 2 Read More »
