Build your own free Magic Leap 1 COVID-19 Detection System. This project uses Magic Leap 1, TensorFlow, Unity & Raspberry Pi 4. Introduction The Magic Leap 1 COVID-19 Detection System 2020 uses Tensorflow 2, Raspberry Pi 4 & Magic Leap 1 to provide a spatial computing detection system. The project uses the COVID-19 Tensorflow DenseNet Classifier a […]
Magic Leap 1 COVID-19 Detection System Read More »
Control an LED over the internet from your mobile phone with Raspberry Pi. Inspired from the Internet Switch tutorial by Talha which was based on ESP8266, I thought of doing the same on Raspberry Pi instead. So that is what we are going to do in this tutorial. We are going to use Raspberry Pi and Grandeur
Specs for Intel’s NUC 8 rugged mini PC and 3.5-inch dashboard have been released. The fanless NUC 8, code-named Chaco Canyon, runs Windows or Linux on low-power (6W TDP) dual-core and 1.1 GHz/2.4GHz Celeron N3350 from Apollo Lake with dual HDMI ports, 4GB RAM, soldered down 64GB eMMC, and M.2 22 x 80 key M slot for
INTEL’S NEW FANLESS APOLLO BASED NUC MINI-PC AND SBC RELEASED Read More »
The internet as we knew it, a few years back, was being run by humans; the majority of everything that happens over the internet – the messages, the data, the communication was between people. But this is changing gradually; a new category of devices that do not have any communication between humans is beginning to
TOP 5 IOT CLOUD PLATFORMS EXIST TODAY Read More »
It’s a common scene: a dedicated radio amateur wakes up early in the morning, ambles over to their shack, and sits in the glow of vacuum tubes as they call CQ DX, trying to contact hams in time zones across the world. It’s also a common scene for the same ham to sit in the
RADIO REMOTE CONTROL VIA HTML5 Read More »
Raspberry Pi enthusiasts looking for a new project to keep them busy this weekend, may be interested in an excellent Internet connected e-Paper message board built using a Raspberry Pi mini PC, by YouTube maker James Bruton. This is a project I’ve been wanting to build for some time – it’s a message board for
Raspberry Pi Internet connected e-Paper message board Read More »
Are you still writing notes on paper and sticking them to the fridge like it’s the ’80s? Well, if you are, and you read this site, you’d probably like to upgrade to something a bit more 21st century. And, thanks to robot maker [James Bruton], you can leave your old, last century, message taking behind
INTERNET CONNECTED E-PAPER MESSAGE BOARD Read More »
Everyone loves a good bubble machine. These oddly satisfying novelty items have brought children and adults mindless entertainment since their inception. [8BitsAndAByte] had the same thought, but wanted to give their bubble machine a taste of the IoT-age. First, they modified an off-the-shelf bubble machine with a Raspberry Pi and relay module. The Pi can easily
THE INTERNET OF BUBBLE MACHINES Read More »
With the UG85, ICP Germany launches an intelligent and compact indoor LoRaWAN gateway that can be expanded in many ways. The UG85 is offered with a 64-bit ARM Cortex A-53 with 800 MHz, 512MB DDR3 RAM and 8Gb eMMC flash memory. Eight LoRa channels based on the Semtech SX1301 chipset are available, which can be
LORAWAN GATEWAY FOR THE INTERNET OF THINGS Read More »
If you are looking for inspiration to keep yourself busy over the next few weeks, you may be interested in this video camera smart doorbell created using a Raspberry Pi mini PC. Details have been published over on the Hackster.io website and the project should take approximately four hours to complete and is tagged with
Raspberry Pi video smart doorbell project Read More »
