lcd Archives - Raspberry PI Projects

Raspberry Pi Based Sequential Switching: A Budget-Friendly Automation Solution

This commentary dives into a research paper exploring the use of a Raspberry Pi for sequential switching of industrial loads. It analyzes the project’s concept, advantages, and the hardware components involved. Abstract Breakdown The paper proposes a system utilizing a Raspberry Pi, a low-cost computer, to control and automate the switching of industrial loads in […]

Raspberry Pi Based Sequential Switching: A Budget-Friendly Automation Solution Read More »

Embark on Embedded System Development: Raspberry Pi Beginner’s Toolkit

1. Introduction: Raspberry Pi Embedded System Development Kit The Raspberry Pi Embedded System Development Kit offers an ideal platform for both learning and utilizing Raspberry Pi capabilities. Built around the Raspberry Pi Zero, it features a 320*240 LCD with touch functionality for display purposes, along with an integrated chip for audio processing, playback, and recording.

Embark on Embedded System Development: Raspberry Pi Beginner’s Toolkit Read More »

Raspberry Pi RP2040 powers new Waveshare USB dev board with onboard LCD screen

Waveshare has released a new development board for makers that are partial to the Raspberry Pi Pico’s RP2040. Being one of our favorite microcontrollers, we found the opportunity to share hard to ignore. This new board is called the RP2040-GEEK and it sports a color LCD screen on one side as well as access to some useful ports.

Raspberry Pi RP2040 powers new Waveshare USB dev board with onboard LCD screen Read More »

DOGS104-A SERIES COMPACT LOW-POWER FLEXIBLE (4×10) CHARACTER LCD

DISPLAY VISIONS’ DOGS104-A series compact low-power pin connected chip-on-glass character LCD DISPLAY VISIONS EA’s DOGS104-A series character LCDs are available in an FSTN pos. transflective, STN neg. blue transmissive, and FSTN pos. white reflective version. These displays have a 2.54 mm pitch and can be soldered directly or plugged into socket strips. Therefore, cumbersome gluing procedures, the

DOGS104-A SERIES COMPACT LOW-POWER FLEXIBLE (4×10) CHARACTER LCD Read More »

This Pi-Powered Device Plays 8-Track Tapes Without Degrading Them

Like cassette tapes and floppy disks, 8-track tapes are very susceptible to degradation because data is stored on magnetized media. On top of that, 8-track tapes are old enough that physical damage is very common. For example, the foam pads on almost all original 8-track tapes have long since crumbled into dust. Alon Boris wanted

This Pi-Powered Device Plays 8-Track Tapes Without Degrading Them Read More »

ACME SYSTEMS ROLLS OUT SAMA5D27 BASED SOMS

Acme Systems recently launched a series of systems-on-modules (SOMs) based on the Microchip SAMA5D27 microprocessor, which is ideal for extreme-low-power projects that still require a full Linux kernel and operating system, dubbed the RoadRunner. At the core of the RoadRunner is a Microchip MPU, which is designed for low power consumption, and it features an optimized PMIC [Power

ACME SYSTEMS ROLLS OUT SAMA5D27 BASED SOMS Read More »

CM HUNTER – RASPBERRY PI COMPUTE MODULE 4 BOARD WITH ISO INTERFACES

Andreas Eberle and his team have created a new Raspberry Pi Compute Module 4 board with ISO interfaces: the CM Hunter. This is not just another Raspberry PCB,” says Andreas Eberle, as he emphasized that the powerful design tool is not just another IO board that requires you to buy so many different HAT modules. “This Carrier board was

CM HUNTER – RASPBERRY PI COMPUTE MODULE 4 BOARD WITH ISO INTERFACES Read More »

Interfacing 16×2 LCD with Raspberry Pi

In the previous Raspberry Pi project, I demonstrated how to blink an LED using Raspberry Pi and Python programming. Continuing with the series, this project focuses on interfacing a 16×2 LCD with Raspberry Pi. This project provides a comprehensive guide on the steps involved in interfacing a 16×2 LCD with Raspberry Pi. It covers essential

Interfacing 16×2 LCD with Raspberry Pi Read More »

BIQU BX, WORLD’S FIRST OCTOPRINT INTEGRATED FDM 3D PRINTER

Big BigTreeTech is not fond of rushing products to you every month, with their last 3D (BIQU B1) printer having released in July, you can tell they try to deliver meaningful reasons for you to update your 3D printing setup. With the announcement of the new BIQU BX 3D printer, described by the company as “exceptional printing made for

BIQU BX, WORLD’S FIRST OCTOPRINT INTEGRATED FDM 3D PRINTER Read More »

NEW TRIPLE OUTPUT DC POWER SUPPLIES ARE CTUVUS CERTIFIED

B&K Precision, a leading designer and manufacturer of reliable, cost-effective test and measurement instruments, today announces the 9140 Series Triple Output Multi-Range DC Power Supplies. With three isolated and individually controllable outputs, the 9140 (32 V, 8 A) and 9141 (60 V, 4 A) provide up to 300 W of clean power with low ripple and

NEW TRIPLE OUTPUT DC POWER SUPPLIES ARE CTUVUS CERTIFIED Read More »