Here are the following short Python programs that will illustrate how the Raspberry Pi Pico board works. These presume that one or more analog input circuits are connected from the outside to an ADC input. Every one of them can be run by copying the program into code. py on the CIRCUITPY drive provided on […]
Raspberry pi pico analog Input/Output Example Read More »
Hardware components: Nabaztag Not sold anymore, but maybe on Graigslist or eBay? × 1 Raspberry Pi 3 Model B × 1 Google AIY Voice HAT They come as a free gift with The MagPi #57, or you can subscribe to get a notification when they are for sale later on. × 1 SK6812 RGBW LED
Nabaztag Gets a New Life With Google AIY Read More »
Hardware components: Raspberry Pi 3 Model B × 1 Walabot × 1 Unitek USB3.0 4-Port Hub × 1 Power Sonic Model PS-640 F1 6 Volt 4.5 AmpHr Battery Supply × 1 Servo (generic) Personally modified Futaba S3003 for continuous rotation. If using a different brand of servo research the number of spline teeth for your
This will be the easiest Raspberry Pi GPIO LED project ever. If you follow this guide it should take less than 20 minutes to setup and have running. The goal of this project is to get a single LED light blinking based on a Python program running on a Raspberry Pi. In order to do
Easiest Raspberry Pi GPIO LED Project Ever Read More »
Overview I bought a 32×64 RGB LED Panel in May of 2018 just for the hell of it. No real plan or application. I tend to go on buying binges for electronics periodically. I think I might have powered it up with some Arduino code I found online just to make sure all the LEDs
LED Panel Weather App Project Read More »
Introduction The project identifies a common problem: the cumbersome nature of traditional whiteboards. It highlights the benefits of a portable virtual board system: Increased Portability: The system’s compact size makes it easier to carry around compared to traditional whiteboards. Enhanced Interactivity: The LED pen allows users to write and draw on the projected virtual board, replicating the
Projected Virtual Board Using Raspberry Pi Read More »
Display Visions’ 3.5″ intelligent IPS TFT display module includes graphics development software EA Display Visions’ 3.5″ intelligent EA uniTFTs035-ATC display module is an all-in-one implementation of the display, microcontroller unit, and touchscreen. The module includes everything needed to directly control an application and expedite the development, prototyping, and deployment of an HMI/GUI. Design an HMI/GUI
EA UNITFS035-ATC MINI TOUCH PANEL Read More »
A two-man team has created an ultimate LED cube kit for the Raspberry Pi, one that helps to bring your ideas and creativity to life. We created the LumiCube to bring the joy of tinkering with technology to as wide an audience as possible. Perhaps you remember the fun and excitement of sitting in front of
STMicroelectronics L9026 Multi-Channel Relay Driver is optimized for automotive LED and relay applications and is compatible with resistive, inductive and capacitive loads. The L9026 integrates two High-Side drivers and six configurable High-Side/Low-Side drivers and can be driven by SPI or by two dedicated parallel inputs. The device offers advanced diagnostic and protection functionalities such as short to GND,
STMICROELECTRONICS L9026 MULTI-CHANNEL RELAY DRIVER Read More »
The Mcuzone MPW7 HAT for the Raspberry Pi 5 is designed to work with 2230 Wi-Fi 7 M.2 E-Key modules like the Intel BE200, AX210, and AX200, but the M.2 socket can also take Wi-Fi 6/6E modules as well as Google’s Tensor Processing Units (TPUs). It also integrates Bluetooth support via a 1.25mm USB interface
M.2 E-Key Wi-Fi 7 HAT for Raspberry Pi 5 also supports Google TPU Read More »
