The following short Python programs will demonstrate essential operation of the Raspberry Pi Pico board. These assume one or more binary input or output circuits are externally attached. Each can be run by copying the program into code.py on the CIRCUITPY drive offered by the board. The text can be pasted directly from this page, or each […]
Raspberry Pi Pico NeoPixel LED Examples Read More »
Tektronix, Inc. today announced the new 2601B-PULSE System SourceMeter® 10μs Pulser/SMU Instrument, integrating a high-speed current pulser with DC source and measurement functions in one instrument. The new system incorporates PulseMeter™ technology for sourcing current pulses as short as 10μsec at 10A and 10V without the need to manually tune the output to match device impedance up to 3μH. This
1 Executive Summary The document at hand describes the motivation, research, design and prototypingcompleted for the Senior Design 1 Semester at the University of Central Florida. Thefollowing will go into very detailed and rigorous amounts of information concerning thedevelopment of the Smart Mirror project of which Group 8 decided to take on as theirproject for
UCF Senior Design Smart Mirror Read More »
The following short Python programs will demonstrate essential operation of the Raspberry Pi Pico board. These use only the onboard hardware and the serial console. Each can be run by copying the program into code.py on the CIRCUITPY drive offered by the board. The text can be pasted directly from this page, or each file can be
Raspberry Pi Pico Introductory Examples Read More »
The following short Python programs will demonstrate essential operation of the Raspberry Pi Pico board. These assume one or more analog input circuits are externally attached to an ADC input. Each can be run by copying the program into code.py on the CIRCUITPY drive offered by the board. The text can be pasted directly from this page,
Raspberry pi pico analog Input/Output Example Read More »
1 Introduction 1.1 Acknowledgement We would like to thank Dr. Thomas Daniels for the assistance in researching, developing and guiding usthroughout the two semesters we have worked with him. He has been an amazing resource as weworked through challenges on the project. We appreciate all the time and effort that Dr. Daniels has putinto our
Holiday Arboreal Light Project Read More »
Raspberry Pi enthusiast Om Singh based in London has created a new Pico Barcode Raspberry Pi HAT capable of reading 20 different Barcode Symbiology and is based on the DE2120 Barcode Scanner offering both 1D and 2D scanning. Equipped with an on-board micro-USB port the Pico Barcode HAT has this week launched via Kickstarter and
Pico Barcode Raspberry Pi HAT reads 20 different barcode symbiology Read More »
The STUSB4500L from STMicroelectronics is a small-footprint addition to the Company’s USB-C controller IC family designed and certified for pure 5 V sink-only applications. All mandatory features to use the USB-C connector as a 5 V universal power plug are integrated, allowing designers to implement USB-C charging solutions quickly and easily without studying the standard or writing code. USB-C is rapidly
Hardware Setup WARNING: Experience with flying Remotely Controlled QuadÂCopter is required. Binding Procedure Binding is required the first time the craft is used with a new transmitter. It is doneusing the following procedure. To place Rx into binding mode, pace a wire jumper across PCB board “Term 8” Pins 1& 4. This will force the
Autonomous Quadcopter Platform Read More »
SwitchBlox is an open-source ethernet switch designed by Josh Elijah, who is the founder of BoxBlox. It was designed to make life easier for robot and drone developers or anyone who needs to use an ethernet switch. The switch is tiny, thereby making it easy to use in size constrained areas. According to Josh, there’s currently no option
BOXBLOX’S OPEN SOURCE ETHERNET SWITCH OFFERS FIVE PORTS Read More »
