microprocessor Archives - Page 2 of 3

ARROW ELECTRONICS LAUNCHES MULTI-PURPOSE IOT EDGE NODE AND GATEWAY

Arrow Electronics, Inc. and Shiratech have announced the launch of IoT Box, a multi-purpose IoT edge node and gateway solution that enables sensors and actuators to be connected directly to the cloud. IoT Box was developed by Arrow and Shiratech in conjunction with STMicroelectronics (ST). Potential uses for the product include air quality monitoring, safe […]

ARROW ELECTRONICS LAUNCHES MULTI-PURPOSE IOT EDGE NODE AND GATEWAY Read More »

INDUSTRY’S SMALLEST 800MHZ STM32MP1 MODULE SHORTENS DESIGN TIME WITH NEW SUITE OF TOOLS

Octavo Systems OSD32MP15x System In Package Releases into Production with Higher Performance and Two New Development Platforms Octavo Systems, an ST Authorized Partner, has expanded its support of the OSD32MP15x System in Package, the smallest available STMicroelectronics STM32MP1 module, with a production release at speeds up to 800MHz, and two new development boards. OSD32MP15x System in

INDUSTRY’S SMALLEST 800MHZ STM32MP1 MODULE SHORTENS DESIGN TIME WITH NEW SUITE OF TOOLS Read More »

Sparkfun 9 Degrees of Freedom Breakout MPU9150

The Integration of Sensor Data with Raspberry Pi Microprocessor

Abstract To implement various sensors on an integrated robotic system, a programming environment and valid communication methods that is capable of inputting digitized sensor data, and use those data in the control loop, is needed. Keywords: I2C communication, UART communication, Adafruit Ultimate GP Breakout, Sparkfun MPU-9150 Breakout, Raspberry Pi Setup Introduction Sensor data acquisition and

The Integration of Sensor Data with Raspberry Pi Microprocessor Read More »

INKPLATE 6 IS A PROGRAMMABLE KINDLE E-PAPER DISPLAY

If you have ever wondered if there could be a better use for old Kindle screens, then you have to check out the new e-paper display made by e-radionica. The Inkplate 6 is made from recycled Amazon kindle screens. E-paper or electronic paper is an invention which has provided a solution to a pressing problem; blue light. E-papers

INKPLATE 6 IS A PROGRAMMABLE KINDLE E-PAPER DISPLAY Read More »

MYIR LAUNCHES STM32P1 BASED MYC-YA157C CPU MODULE

MYIR, the Shenzhen based electronics manufacturers recently announced the launch of a new product called the MYC-YA157C, which is a CPU Module based on the STM32MP1 dual-core microprocessor that features the Arm Cortex-A7 running at 650MHz alongside a Cortex-M4 core operating at 209MHz. Measuring 45mm x 43mm, the MYC-YA157C CPU Module is a compact System-on-Module (SoM) that combines the STM32MP157 processor

MYIR LAUNCHES STM32P1 BASED MYC-YA157C CPU MODULE Read More »

MYIR INTRODUCES $29 ARM SOM POWERED BY ST STM32MP1

MYIR introduces a cost-effective MYC-YA157C CPU Module powered by ST’s STM32MP1 microprocessor which features dual-core Arm Cortex-A7 operating at up to 650MHz and an embedded Cortex-M4 core operating at up to 209MHz. The module is ready to run Linux OS and targets a wide variety of applications like industrial control, consumer electronics, smart home, medical and more other energy-efficient applications which require

MYIR INTRODUCES $29 ARM SOM POWERED BY ST STM32MP1 Read More »

MIT ENGINEERS BUILD ADVANCED MICROPROCESSOR OUT OF CARBON NANOTUBES

New approach harnesses the same fabrication processes used for silicon chips, offers key advance toward next-generation computers. by Rob Matheson | MIT News Office After years of tackling numerous design and manufacturing challenges, MIT researchers have built a modern microprocessor from carbon nanotube transistors, which are widely seen as a faster, greener alternative to their traditional silicon counterparts.

MIT ENGINEERS BUILD ADVANCED MICROPROCESSOR OUT OF CARBON NANOTUBES Read More »

A CARBON NANOTUBE MICROPROCESSOR MATURE ENOUGH TO SAY HELLO

Did you know that researchers are looking for an alternative to silicon? Did you know in principle that Carbon Nanotubes processor could run three times faster while consuming about one-third of the energy of their silicon predecessor? The Engineers at MIT and Analog Devices have created the first fully programmable 16-bit Carbon Nanotube microprocessor. Since Silicon Transistor

A CARBON NANOTUBE MICROPROCESSOR MATURE ENOUGH TO SAY HELLO Read More »

I.MX8M MINI BASED MODULE FEATURES GRYFALCON NEURAL ACCELERATOR

The i.MX8M Mini SOM – Building Block with Embedded Artificial Intelligence Capabilities i.MX8M Mini SOMs offer a compact System-on-Module platform with robust processing power and artificial intelligence acceleration using Gyrfalcon’s Lightspeeur® 2803S Neural Accelerator – designed for next generation Edge AI applications using the standard TensorFlow, Caffe and PyTorch model development frameworks. SolidRun’s i.MX8M Mini SOMs harness NXP’s

I.MX8M MINI BASED MODULE FEATURES GRYFALCON NEURAL ACCELERATOR Read More »

AJIT – FIRST-EVER “MADE IN INDIA” MICROPROCESSOR DESIGNED BY IIT BOMBAY

In this modern era, the electronics industry is incomplete without microprocessors. From daily household appliances to space exploration – microprocessors are accompanying us everywhere and making lives way easier. But, independently designing and manufacturing a processor is an extremely complicated task and done by only a few countries like the US, Italy, France, Japan, Taiwan,

AJIT – FIRST-EVER “MADE IN INDIA” MICROPROCESSOR DESIGNED BY IIT BOMBAY Read More »