USB is a very well documentated and reliable interface. Nearly every computer system today is equipped with one or more USB host connectors. Sometimes you need some inputs and outputs for tasks surrounding your PC or you have a cool idea for an automation with your Raspberry Pi or other micro computer. In all these […]
USB relay module for Windows, Linux, Raspberry Pi Read More »
Microchip Technology Inc., has announced the first in a series of modules for the LoRa technology low-data-rate wireless networking standard. The system is designed to allow Internet of Things (IoT) and Machine-to-Machine (M2M) wireless communication offering a range of more than 10 miles (suburban), a battery life of greater than 10 years, and the ability
Microchip LoRa Network Module Read More »
Introduction Step 1: The shield (hardware) Step 2: Using GSM/GPRS module with AT commands Step 3: Powering the board Step 4: Using the shield in standalone mode – Calls Originating and receiving voice calls Command summary Step 5: Using the shield in standalone mode – Sending and receiving SMS Command summary Step 6: Using the
GPRS/GSM Quadband Module for Arduino and Raspberry Pi Tutorial (SIM900) Read More »
CALAO Systems has just launched an industrial single board computer (SBC) for professional Raspberry Pi developers called PiNBALL or, if you prefer, PAC-1210-S200-B2835-EXX…. The board is powered by the Raspberry Pi Compute Module, features interfaces such as two mini PCIe slots (for USB, I2C, GPIOs,…), fast Ethernet, HDMI, opto-isolated inputs and outputs, etc., +6 to
CALAO Systems Introduces PInBALL Industrial Board Based on Raspberry Pi Compute Module Read More »
Techbase has designed a Raspberry Pi Compute Module into a Linux-based “ModBerry” automation computer backed by an “iMod” cloud platform for remote control. The computer-on-module version of the Raspberry Pi Compute Module, which began shipping this week, was anticipated by many, but perhaps nowhere so acutely as in Poland. First, we heard about A Sherlybox
Automation controller taps Raspberry Pi Compute Module Read More »
Ingredients: 1 x Raspberry Pi 1 x GPS shield for Raspberry Pi 1 x Antenna 1 x Two small wires (Red an Black) NOTE: If you don’t have a Raspberry Pi you can get one buying a Raspberry Pi Starter Kit. Difficulty: Medium – Preparation Time: 30 minutes NOTE: All the code examples in this
GPS Module for Raspberry Pi Tutorial Read More »
Roboteq launched a Kickstarter project to build an I/O add-in card for robotics navigation that stacks atop a Linux-based Raspberry Pi board. The RIO (Raspberry IO) is based on a 32-bit STM32 microcontroller, and includes a 3A DC/DC converter, several serial interfaces, a CAN interface, 21 GPIO, and an optional module with an accelerometer, gyroscope,
Module turns Raspberry Pi into robot navigation computer Read More »
Having played around with the Pi camera I quickly realised I needed to make some sort of stand for it. The module weighs almost nothing and is tiny so it can be quite hard to keep in one place when you are experimenting. The Raspberry Pi Foundation apparently recommends Blu-tack, based on cost, simplicity and
Raspberry Pi Camera Module Mechanical Dimensions Read More »
