output Archives - Page 6 of 23 - Raspberry PI Projects

RASPBERRY PI AND PPLOGGER MAKE A LOW-COST CHEMILUMINESCENCE DETECTOR

[Laena] and her colleagues at the La Trobe Institute for Molecular Science in Melbourne, Australia used a Raspberry Pi to make a low-cost electrochemiluminescence (ECL) detector to measure inflammation markers, which could be used to detect cardiovascular disease or sepsis early enough to give doctors a better chance at saving a patient’s life. ECL reactions emit light […]

RASPBERRY PI AND PPLOGGER MAKE A LOW-COST CHEMILUMINESCENCE DETECTOR Read More »

0 TO 10 V ADJUSTABLE LAB POWER SUPPLY WITH CURRENT CONTROL

The circuit presented here is a very simple and easy to build Lab Power Supply. The output of this power supply is adjustable from 0 to 10V DC, and it has current limit control up to 3A. Two Trimmer potentiometers are provided to adjust the voltage and current. The input supply is DC 12V to 18V

0 TO 10 V ADJUSTABLE LAB POWER SUPPLY WITH CURRENT CONTROL Read More »

1A OVER CURRENT PROTECTION LOAD SWITCH

The Over-current limit load switch project presented here provides full protection to devices and loads from access load conditions. The default current limit is set to 1 Amp, however, this load limit is adjustable from 0.4A to 2A with the help of R4 ISET resistor. When an overload condition occurs circuit responds to that overload condition that lasts longer than

1A OVER CURRENT PROTECTION LOAD SWITCH Read More »

LANTRONIX ANNOUNCES ULTRA-COMPACT OPEN-Q 865XR SYSTEM ON MODULE (SOM) TO POWER IOT

Lantronix Inc. (NASDAQ: LTRX) a global provider of Software as a Service (SaaS), engineering services and hardware for Edge Computing, the Internet of Things (IoT) and Remote Environment Management (REM), today announced its new Open-Q™ 865XR System on Module (SOM) solution for IoT applications. With the Open-Q 865XR SOM, Lantronix is leading the way to next-gen intelligent Augmented

LANTRONIX ANNOUNCES ULTRA-COMPACT OPEN-Q 865XR SYSTEM ON MODULE (SOM) TO POWER IOT Read More »

FIRST BIZEN QUANTUM TUNNELLING TRANSISTORS LAUNCHED

A UK startup is to ship its first 1200V power devices using a new silicon architecture called Bizen that fits into TO247 or TO263 packages. by Nick Flaherty @ eenewseurope.com The first devices to use the Bizen process technology include three parts rated at 1200V/75A, 900V/75A and 650V/32A, available in the industry-standard TO247 or TO263 power MOSFET packages. These are

FIRST BIZEN QUANTUM TUNNELLING TRANSISTORS LAUNCHED Read More »

DT71 MINI DIGITAL TWEEZERS

The all-in-one DT71 Mini Digital Tweezers is a measuring tool with full differential input measurement, capable of functioning as an LCR / ESR meter, a digital multimeter, or/and an SMD Tester. Design with innovation and the highest user experience intentions, the DT71 subvert the appearance restrictions of traditional measuring instruments. It is compact by design and has a unique trinary structure

DT71 MINI DIGITAL TWEEZERS Read More »

$10 SYSTEM-ON-MODULE DRIVES FULL HD SMART DISPLAYS VIA SIGMASTAR SSD201 SOC

Are you looking for a cheap Full HD display driver? Then you may have come to the right place! SigmaStar, one of the cheapest camera processors manufacturer on the market, just released the new low-cost module IDO-SOM2D01, built upon their own SSD201 SOC, a Smart HD Display Controller. The SSD201 itself is a highly integrated SoC. It is

$10 SYSTEM-ON-MODULE DRIVES FULL HD SMART DISPLAYS VIA SIGMASTAR SSD201 SOC Read More »

ANALOG CLOCK MOTOR DRIVER IMPLEMENTATION USING GREENPAK™

Introduction Even in a digital world, classic analog clocks have a timeless style. This simple but universal technology is presented in the article. The implemented project uses a dual-rail GreenPAK™ SLG46121 which can perform all the active electronic functions needed in an analog clock, including motor driver and crystal oscillator. Additionally, GreenPAK ICs are low-cost and tiny

ANALOG CLOCK MOTOR DRIVER IMPLEMENTATION USING GREENPAK™ Read More »

ISYS-6030 60 GHZ RADAR SYSTEM

InnoSenT’s radar is a highly precise distance measurement system for level determination and collision protection InnoSenT’s iSYS-6030 radar system offers high-precision, focused distance measurement. The product is ideal for level measurement and collision avoidance. It enables reliable and exact distance detection even under extreme conditions such as heat, dust, or vibration. The radar collects data from

ISYS-6030 60 GHZ RADAR SYSTEM Read More »

T3AWG2152/T3AWG2152-D MULTIFUNCTIONAL 16-BIT ARBITRARY/FUNCTION GENERATORS WITH INNOVATIVE ARCHITECTURE AND PATTERN GENERATION

The T3AWG2152-D’s analog/digital synchronized output represents a valuable tool to simulate, troubleshoot, or validate digital designs. Saelig Company, Inc. has introduced the Teledyne LeCroy T3AWG2152/T3AWG2152-D Multifunctional 16-bit Arbitrary/Function Generators that are designed with innovative architecture and synchronized digital pattern generation. The T3AWG2152 and T3AWG2152-D generators are multifunctional 150MHz arbitrary/sweep/function generators that combine multiple functions in a single

T3AWG2152/T3AWG2152-D MULTIFUNCTIONAL 16-BIT ARBITRARY/FUNCTION GENERATORS WITH INNOVATIVE ARCHITECTURE AND PATTERN GENERATION Read More »