transceivers

MICROCHIP POLARFIRE SOC FPGA ICICLE KIT

MICROCHIP POLARFIRE SOC FPGA ICICLE KIT

Microchip’s PolarFire SoC FPGA Icicle Kit is an evaluation platform for the company’s mid-range PolarFire SoC FPGA family, a portfolio of RISC-V-based devices that contain secure hardware features, are capable of running off-the-shelf Linux and/or real-time operating systems (RTOS), and consume up to 60 percent less power than competing FPGA solutions, according to the company. The SoC […]

MICROCHIP POLARFIRE SOC FPGA ICICLE KIT Read More »

ZYNQ ULTRASCALE RFSOC ZCU208 ES1 EVALUATION KIT

ZYNQ ULTRASCALE+ RFSOC ZCU208 ES1 EVALUATION KIT

The Zynq® UltraScale+™ RFSoC ZCU208 Evaluation Kit is the ideal RF test platform for both out-of-box evaluation and cutting-edge application development. The Xilinx Zynq UltraScale+ RFSoC ZCU208 ES1 Evaluation Kit features a Zynq UltraScale+ RFSoC ZU48DR, which integrates eight 14-bit 5GSPS ADCs, eight 14-bit 10GSPS DACs, and eight soft-decision forward error correction (SD-FEC) cores designed to

ZYNQ ULTRASCALE+ RFSOC ZCU208 ES1 EVALUATION KIT Read More »

MEET THE STRATIX 10 NX FPGA THE FIRST AI OPTIMIZED FPGA FROM INTEL

MEET THE STRATIX 10 NX FPGA: THE FIRST AI-OPTIMIZED FPGA FROM INTEL

As the immense value proposition of Edge Computing becomes more obvious, Chip manufacturers are working twice as hard to be the one that develops the SOC, FPGA, or MPU that provides designers with all that is needed to develop powerful Edge AI-based solutions. While a lot of progress has been made with MPUs and SOCs via impressive boards like the Google’s

MEET THE STRATIX 10 NX FPGA: THE FIRST AI-OPTIMIZED FPGA FROM INTEL Read More »

ISOLATED FULL DUPLEX RS 485 TRANSCEIVERS

ISOLATED FULL-DUPLEX RS-485 TRANSCEIVERS

This module is an isolated full-duplex differential line driver and receiver for TIA/EIA RS485/RS422 applications. The module is ideal for long transmission lines because the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical barrier of the device is tested to provide isolation of 2500Vrms between bus line Trans-receiver and the logic-level interface.

ISOLATED FULL-DUPLEX RS-485 TRANSCEIVERS Read More »

COMPREHENSIVE HARDWARE CODEC SOLUTION USING IWAVE’S ZYNQ ULTRASCALE FPGA SOM

COMPREHENSIVE HARDWARE CODEC SOLUTION USING IWAVE’S ZYNQ ULTRASCALE+ FPGA SOM

Over the past years, live video streaming has undergone major technological advancements, triggering large scale implications in various commercial and industrial applications such as security surveillance system and online video broadcast. Advancements in video compression standards such as H.264 (AVC) and H.265 (HEVC) have made it possible for users to stream Full HD and 4K

COMPREHENSIVE HARDWARE CODEC SOLUTION USING IWAVE’S ZYNQ ULTRASCALE+ FPGA SOM Read More »

RS 485 Shield for Raspberry Pi

RS-485 Shield for Raspberry Pi

PRODUCT DETAILS Description RS-485 is a cost-effective solution in serial communication networks. It can be used up to data rates at 10 Mbit/s or distances up to 1200m at lower speeds. This RS-485 Shield is a standard add-on board for Raspberry Pi. It is integrated with simple screw terminal as well as DB9 interface.  Features One

RS-485 Shield for Raspberry Pi Read More »

Catena 4710 – LoRaWAN based Feather compatible FPGA board with RISC V Core

Catena 4710 – LoRaWAN based Feather-compatible FPGA board with RISC-V Core

With the increase of high integration programmable chips, FPGAs are getting more and more popular. FPGAs has been traditionally known to be generally complex, but a new line of FPGAs have been showing some promise and that is believed that will help increase their popularity. Tiny FPGAs are the next promising thing, they are low-cost

Catena 4710 – LoRaWAN based Feather-compatible FPGA board with RISC-V Core Read More »

Bluetooth 5 transceivers are self powered

Bluetooth 5 transceivers are self-powered

Atmosic Technologies Inc. (Saratoga, CA) has launched the M2 and M3 Bluetooth 5.0 transceiver chips, claiming them to be the lowest power Bluetooth wireless chips available. Atmosic took a wireless agnostic approach to determine the most power-efficient foundation for its first IoT connectivity solutions. To radically reduce power consumption, Atmosic has developed three key technologies:

Bluetooth 5 transceivers are self-powered Read More »

Scroll to Top