ups Archives - Page 2 of 2 - Raspberry PI Projects

LiFeP04wered/Pi+, A High-Performance Battery Power System For Raspberry Pi

LiFePo4wered/Pi+ is simply a better version of the LiFePo4wered/Pi3 and the LiFePowered/Pi. These devices are all designed to solve the issue of power supply to the raspberry pi. LiFePo4wered is simply a high-performance battery power system which is acting as an option for raspberry pi projects where the likes cellphone adapters and USB power banks …

LiFeP04wered/Pi+, A High-Performance Battery Power System For Raspberry Pi Continue Reading

Monitor an older UPS status with a Raspberry Pi

Here is a small mod I made for an OPTI-UPS VS575C. The ups has a serial port and works well with Windows, along with a serial to USB adapter and the Opti-UPS ‘Sentry’ software, the UPS can tell Windows when it has switched to battery mode on an AC power failure. This allows Windows to …

Monitor an older UPS status with a Raspberry Pi Continue Reading

Juice4Halt – Supercapacitor UPS for Raspberry Pi

The Story When we started thinking about using the Raspberry Pi in applications requiring a bit more reliable operation, we always had to face the same problems: Power outages Corrupted file systems or SD-cards Brownouts Inrush currents As a solution to these problems, we have created the Juice4Halt module. It combines brownout protection and a …

Juice4Halt – Supercapacitor UPS for Raspberry Pi Continue Reading

Raspberry Pi supercapacitor micro-UPS seeks funding

Nelectra is crowdfunding a supercapacitor based micro-UPS for Raspberry models B and B+, enabling brownout protection and “last gasp” shutdown sequences. Bratislava, Slovakia based Nelectra’s first product was a generic “Juice4Halt” supercapacitor based micro-UPS (uninterrupted power supply) module aimed at single board computers used in industrial and embedded applications. The adapters protect the SBC’s operation …

Raspberry Pi supercapacitor micro-UPS seeks funding Continue Reading