Test Ideas: Protect USB measurement circuits

USB data-acquisition modules offer good value and ease of use, which makes them an attractive choice for manufacturing test. But before you use the modules in a manufacturing test system, you need to take steps to protect them. During manufacturing test of circuit boards or subassemblies, a defect in an assembly may result in a condition that damages a data-acquisition module.

The typical USB DIO (digital I/O) module uses a set of 8-bit bidirectional tristate ports. Figure 1 shows a typical circuit that we test with one of those ports. We use one digital output pin from the USB module to drive the circuit and one digital input pin to read the circuit's response. If the circuit works properly, we expect to see a clean digital signal from the circuit. For a circuit coming off the manufacturing line, however, the digital input pin of the DUT (device under test) could be shorted to ground, shorted to VCC, or shorted through some low impedance to a higher voltage. Any of these conditions can damage the USB module's input pin.

Protect USB measurement circuits

If there's a short across the 2-k resistor from the collector to the +15-V supply, that voltage will appear at the USB module's input pin, which could damage it. To avoid such damage, we add protection circuits between the DUT and the USB module.

If the DUT has no power sources above the DIO's VCC voltage, then a simple buffer resistor is all you need to protect the DIO module. The only risk is driving logic into a short at an opposite GND or VCC state. You should calculate the resistor's value so it lets the circuit function properly but limits current to a safe value when shorts occur.

 

Read more: Test Ideas: Protect USB measurement circuits


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top