The TSL2584TSV is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output with a fast-mode I²C interface. The device combines one broadband photodiode (visible plus infrared), one infrared-responding photodiode, and a photopic infrared-blocking filter on a single CMOS integrated circuit. Two integrating analog to Digital Converters (ADCs) convert the photodiode currents into a digital output that represents the irradiance measured on each channel.
This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response. The TSL2584TSV supports a traditional level style interrupt that remains asserted until the firmware clears it.
Key Features
- Integrated on-chip photopic filter
- Patented dual-diode architecture
- 1M:1 dynamic range
- Programmable interrupt function
- Area efficient 1.145 x 1.66 x 0.32mm Through-Silicon-Via
Key Benefits
- Provides near photopic responsiveness while allowing lux calculation regardless of glass type
- Enables operation in IR light environments
- Enables dark room to sunlight operation
- Reduces micro-processor Interrupt Overhead
- Enables operation in low profile applications
Product Facts
Supply Voltage [V] | 2.7 -3.6 |
Interface | I2C – 1.8 |
Programmable | Gain and Integration Time, Interrupt |
Maximum Lux | 33000 |
Temperature Range [°C] | -40 to 85 |
Packages | TSV (6-Pin) |
Remark | Unlimited Manufacturing Floor Life with Moisture Sensitivity Level-1 (MSL1) rating |
For more detail: TSL2584TSV Ambient Light Sensor