AVNET SHOWCASES RASPBERRY PI LOOKALIKE “MAAXBOARD MINI”

Avnet’s NXP i.MX 8M Mini SBC seems very familiar if you ever seen a Raspberry Pi, as their I/O looks rather similar at first glance, but is it more than that? Actually, yes.

MaaXBoard Mini is a single board computer based on the NXP IMX8M Mini SOC series, designed by Avnet Manufacturing services. From the outside, it comes at a compact size with some interesting peripheral interface options, such as Gigabit Ethernet, USB 2.0 host, MiPi-DSI, MIPI-CSI, Micro SD card, Wi-Fi, Bluteooth and GPIO. Regarding the hardware, it’s based on the NXP’s first embedded multicore applications processor, which is built using the advanced 14LPC FinFET process technology, a 14 nanometer fabrication process, providing more speed and improved power efficiency over its predecessor, the i.MX 8M. However, it comes with a more limited feature set than the earlier-released MaaXBoard, where the MIPI-DSI is preffered over HDMI, leaving you with a smaller resolution of 1080p at 60fps instead of the 4K 60fps, paired with a different GPU, the 4GB DDR4 is downgraded for a mere 2GB, are some of the most noticeable changes.

The full list of specs are:

  • CPU Multicore Processing:
    • 4x Cortex-A53 core up to 1.8GHz per core (32KB L1-I Cache / 32 kB L1-D Cache / 512 kB L2 Cache)
    • 1x Cortex-M4 core up to 400MHz (16 kB L1-I Cache / 16 kB L2-D Cache)
  • 3D GPU (1x shader, OpenGL® ES 2.0) / 2D GPU
  • 40 Pin IO Interface (Expands I2C, SPI, UART, I2S Interfaces)
  • MIPI-CSI Camera Interface
  • MIPI-DSI Display Interface
  • Gigabit Ethernet interface (RJ45)
  • 4 USB2.0 Host ports
  • Micro SD Card (TF Card) Interface
  • 1 × 8bits and 1x 7bits GPIO Interface (Support Audio peripheral expand)
  • USB Type C power connector (5V / 3A)
  • 1 × Power Button, 2 × User Button, 2 × User LED
  • Wi-Fi + Bluetooth 4.2

As software is concerned, you can be assured of Android 9.0 and Linux (Yocto and Debian) support, containing an interesting amount of documentation to work with each of them.

Regarding the accessories, you are not limited, as you can get components such as a compatible 7” display for $51.02, a MIPI-DSI camera module for an extra $12.24, a FT232 USB to UART module for $5.92 and a USB to CAN module for $28.57.

Read more: AVNET SHOWCASES RASPBERRY PI LOOKALIKE “MAAXBOARD MINI”

Leave a Comment

Your email address will not be published.

Scroll to Top
Read previous post:
CREATE MANUFACTURING-READY FOOTPRINTS & 3D MODELS WITH AUTODESK LIBRARY.IO
CREATE MANUFACTURING-READY FOOTPRINTS & 3D MODELS WITH AUTODESK LIBRARY.IO

If you ever made a PCB, you quickly realized that the component library of the PCB design software is usually pretty...

Close