Banana PI gpio extend board, compatible with Raspberry PI

Specifications

1, Banana pi I2C GPIO extend board,can use on raspberry pi
2, Banana PI Accessories
3. Factory direct sale

Product Overview:

 This module is designed specifically for expand for the GPIO of the Banana Pi a which can effectively solve the banana send IO port insufficient. It use PCF8574 chip to expand 8 Bidirectional IO. The module connection to the Banana Pi through I2C bus. There are 8 I2C address in the module and user can choose one of them through setup the “ADDR” jumper. User also can choose 5V or 3.3V electric level. Module with isolation protection, can effectively prevent external high voltage damage to the Banana Pi. Multiple module can cascade.

PiLarm Portable Raspberry Pi Room Alarm diagram Product Features:

— 8 Bidirectional IO

— 8 I2C-address

— Isolation protection

— Use wiringPi API , sample code

— 100 kHz I2C-bus interface (Standard-mode I2C-bus)

 Port:

— Banana Pi insert port

— Banana Pi cascade port

— EXT0-EXT7 expand GPIO

— Electric level selection jumper

— I2C-address selection jumper

 Product Parameters:

— Working voltage: 2.5V-6V

— IO voltage: 3.3V or 5.5

— Expand 8 Bidirectional IO

— I2C bus

— 100 kHz I2C-bus interface (Standard-mode I2C-bus)

— −40°C to +85°C operation

 Typical Application:

— LED signs and displays

— Key pads

— Instrumentation and test measurement

— Driver numeric display

— Drive the lattice screen

 How to use:

— Insert the module that the silk screen says “BPI IN”. Pay attention don’t make the direction reversed! The correct direction of insert module is above the Banana Pi’s PCB;  EXT0-EXT7 are expand GPIO,user can use DuPont Line to connection peripheral. The header which near silk screen write “EXT” expand GPIO of Banana Pi, user can cascade the other module or the same module. If you want switch the electric level, just setup the jumper

 

For more detail: Banana PI gpio extend board, compatible with Raspberry PI