Forlinx has launched the OK1028A-C SBC, alongside a FET1028A-C module, which is designed based on Cortex -A72 featuring dual-core processor LS1028 A up to 1. 5G Hz. It features on-board 2GB DDR4 RAM and 8GB eMMC, can support 5 Gigabit Ethernet ports with TSN, 2 CAN-FD, USB3.0, UART, SPI, IIC, LVDS, TF card slot, SATA3.0, Headphone peripheral sources, […]
FORLINX LAUNCHES OK1028A-C NETWORKING SBC OFFERS LVDS DISPLAYS Read More »
With the market being flooded by “Pi” branded products, it becomes hard to find out which ones deserve your attention and bring something new to the table, and not just impersonate the original Raspberry Pi models. This is as big of a rant you are going to get today, as we take a peek to the
ORANGE PI ZERO 2 SBC DEBUTS ALLWINNER H1616 Read More »
The NORA-B10 series are small, stand-alone Bluetooth 5.2 low energy, wireless microcontroller unit (MCU) modules from the Swiss wireless chip manufacturer u-blox. These modules are built around the Nordic nRF5340 chip that is powered by two Arm® Cortex®-M33 processor cores. The first core is intended for high-performance applications, clocked at either 128 or 64 Mhz. The second core is clocked at 64
BLUETOOTH 5.2 MODULE POWERED BY ENERGY EFFICIENT ARM CORTEX-M33 Read More »
The Kontron SMARC-fA3399 module with Arm® Rockchip processor is suitable for high performance applications and is leading regarding price/performance ratio – a dedicated software community continuously pushes the application spectrum Kontron, a global leader in IoT/Embedded Computing Technology (ECT), is launching the new fA3399 SMARC module, which uses the Rockchip RK3399K Arm® processor. In the benchmark of
NEW SMARC MODULE SUPPORTS AI-BASED POINT-OF-SALE APPLICATIONS Read More »
Forlinx has published details on the headless sandwich-style OK1028A-C SBC with a FET1028A-C module powered with a 1.5GHz, dual-core, Cortex-A72 LS1028A. The SBC comes with the support for the LVDS interface to enable HMI (Human-Machine Interface) applications. The FET1028A-C module has the support for five 2.5GbE ports but the OK1028A-C SBC is limited to five 1GbE ports. The OK1028A-C is equipped with
FET1028A-C SOM POWERED BY LS1028A OFFERS FIVE-PORT NETWORKING SOLUTION Read More »
We have all been there. You get a new development board, you go online to check how you communicate with it and then you realize you need a new connector that costs some extra cash. And here goes on the cycle of electronic waste, because it generally only works with boards from that company, hence you
TIGARD IS HERE TO BUST OPEN ANY EMBEDDED PHYSICAL INTERFACE YOU CAN FIND Read More »
Are you on the market for a beefy, general use or cluster computer, but do not want to break the bank or have a giant, power-hungry machine in your office? You might be thinking “nah, too many compromises, no way this is going to work”. Then think again, because you should never underestimate the power of
TURING PI 2 MINI-ITX CASE HOUSES A COMPUTE MODULE 4 FROM RASPBERRY PI Read More »
Lantronix had announced its new Lantronix Open-Q™ 610 μSOM based on the powerful Qualcomm® QCS610 System on Chip (SOC). This micro System on Module (µSOM) is designed for connected visual intelligence applications with high-resolution camera capabilities, on-device artificial intelligence (AI) processing and native Ethernet interface. They also released a Qualcomm camera-focused development kit that run linux and an AI enabled octa-core Qcs610 Soc
LANTRONIX LAUNCHES OPEN-Q™ 610 ΜSOM AND OPEN-Q 610 DEVELOPMENT KIT Read More »
Pine64 announced its open-spec PineCube back in 2019 as a device called The Cube equipped with the 8-megapixel Sony iMX179 CMOS sensor. But for the technical issues with the Sony sensor, they changed it into a 5MP OmniVision OV5640 sensor and implemented the new name PineCube. The camera development kit has now shipped for $29.99. The PineCube is powered by
PINECUBE CAMERA DEV KIT POWERED BY 5MP OMNIVISON OV5640 Read More »
Selpic Inc, a leading company focusing on digital printing solutions, has been developing innovative printing technologies since its foundation. Following the debut of Selpic P1, Selpic is going to launch the world’s most cost-effective 3D printer Star A on Kickstarter soon. Star A is an ultra-compact and lightweight open-source 3D printer which is also easy to operate
