channel Archives - Page 4 of 7 - Raspberry PI Projects

PICOSCOPE 6000E 4-CHANNEL 500MHZ MIXED-SIGNAL OSCILLOSCOPES

The PicoScope 6000E 8-channel oscilloscope series has grown to include 4-channel versions, bringing very high-speed performance to the 4 or 8 analog channel, 16 digital channel oscilloscope world, with up to 5GSa/s real-time sampling and 4GSa deep memory Saelig Company, Inc. has introduced the 4-channel PicoScope 6000E Series 500MHz Oscilloscopes, which provide 8 to 12 bits of […]

PICOSCOPE 6000E 4-CHANNEL 500MHZ MIXED-SIGNAL OSCILLOSCOPES Read More »

WORLD’S FIRST FULLY SELF-CONTAINED RASPBERRY PI AUDIO HAT BOARD WITH MERUS™ CLASS D MULTILEVEL AMPLIFIER

Infineon Technologies AG developed the world’s first fully self-contained Raspberry Pi audio amplifier HAT (Hardware attached on Top) board. It offers high definition audio at boom box power levels in a small form factor. The Infineon proprietary multilevel technology ensures minimum size and consumption, state of the art power efficiency, and HD audio quality for

WORLD’S FIRST FULLY SELF-CONTAINED RASPBERRY PI AUDIO HAT BOARD WITH MERUS™ CLASS D MULTILEVEL AMPLIFIER Read More »

A SIMPLE MINIATURE DIGITAL STORAGE OSCILLOSCOPE POWERED BY AN STC MCU

For makers and electronics engineers, the oscilloscope is one of the most important tools in the lab. It is a test instrument for visualizing and observing various signals usually as a two-dimensional plot of signals against time. Apart from being used to view and compare waveforms in the design and debugging of electronic systems, the

A SIMPLE MINIATURE DIGITAL STORAGE OSCILLOSCOPE POWERED BY AN STC MCU Read More »

SINGLE-ENDED, 2-CHANNEL GAN CLASS D AMPLIFIER – EVALUATION BOARD

The EVAL_AUDAMP24 e-mode GaN HEMT-based evaluation board from Infineon Technologies is a 2-channel, 225W/ch (4Ω at ±43V) or 250 W/ch (8Ω at ±63V) half-bridge class D audio power amplifier for high-end Hi-Fi audio systems. This evaluation board demonstrates how to use the IGT40R070D1 E8220 CoolGaN™ gallium nitride transistor together with the MERUS™ IRS20957SPBF controller IC, implement protection circuits, and

SINGLE-ENDED, 2-CHANNEL GAN CLASS D AMPLIFIER – EVALUATION BOARD Read More »

ADVANTECH RELEASES HIGH-PERFORMANCE 3.5” SBC MIO-5373 WITH 8TH GEN. INTEL® CORE™ PROCESSORS

Advantech (2395.TW), a leading global provider of IoT systems and embedded platforms, is pleased to announce the latest 3.5” SBC MIO-5373 based on the 8th Gen. Intel Core platform with low-power SoC. Featuring compact 146 x 102mm dimensions, the MIO-5373 design not only offers impressive I/O functionality but also provides domain-focused features like CANBus and

ADVANTECH RELEASES HIGH-PERFORMANCE 3.5” SBC MIO-5373 WITH 8TH GEN. INTEL® CORE™ PROCESSORS Read More »

EXTREMELY COMPACT BREADBEE HAS 1GHZ ARM CORTEX-A7 SBC AND ON-BOARD ETHERNET

Measuring about 32 x 30 mm in footprint, Palmer’s fully-functional development board is a very small Linux-based single-board computer built around an ARM Cortex A7 SoC and targets IP cameras. There are no solutions yet that can run a real OS like Linux that can be integrated by hobbyists into boards from cheap PCB vendors

EXTREMELY COMPACT BREADBEE HAS 1GHZ ARM CORTEX-A7 SBC AND ON-BOARD ETHERNET Read More »

Measure ECG biosignals with the Raspberry Pi PiEEG shield

Raspberry Pi enthusiasts, developers and enthusiasts building projects needing to measure ECG, EEG or EMG bio-signals may be interested in a new open source Raspberry Pi shield specifically designed for the job and aptly named the PiEEG. Specifically created to measure bio-signals such as those used in electroencephalography (EEG), electromyography (EMG), and electrocardiography (ECG) the

Measure ECG biosignals with the Raspberry Pi PiEEG shield Read More »

A sample circuit for connecting a three channel analog accelerometer useful for measuring tilt and motion.

Raspberry pi pico analog Input/Output Example

The following short Python programs will demonstrate essential operation of the Raspberry Pi Pico board. These assume one or more analog input circuits are externally attached to an ADC input. Each can be run by copying the program into code.py on the CIRCUITPY drive offered by the board. The text can be pasted directly from this page,

Raspberry pi pico analog Input/Output Example Read More »

ECONOMICAL SSA3075X-R 7.5GHZ REAL-TIME SPECTRUM ANALYZER

The SSA3075X-R extends the Siglent SSA3000X series to add real-time spectrum analysis capabilities for intermittent and frequency-hopping signals used in commercial communications and 5G applications. Saelig Company, Inc. has introduced the SIGLENT SSA3000X-R Real-Time Spectrum Analyzers (RTSA) which are powerful and flexible tools for complex RF spectrum and signal analysis. With a capability of 40MHz analysis bandwidth and

ECONOMICAL SSA3075X-R 7.5GHZ REAL-TIME SPECTRUM ANALYZER Read More »

A NEW DUAL CHANNEL TEMPERATURE SENSOR WITH RESISTOR PROGRAMMABLE TEMPERATURE SWITCHES

Texas Instruments has announced a new IC that is a part of family of ultra-low power, dual channel, resistor programmable temperature switches that enable protection and detection of system thermal events from –40 °C to 125 °C. The TMP390-Q1 offers independent overtemperature (hot) and undertemperature (cold) detection. The trip temperatures (TTRIP) and thermal hysteresis (THYST) options are programmed by

A NEW DUAL CHANNEL TEMPERATURE SENSOR WITH RESISTOR PROGRAMMABLE TEMPERATURE SWITCHES Read More »