channels

Board to Board Communication

Board-to-Board Communication

In this lab, you will establish UART based communication channels between the Pi 4 and the HiFive 1 boards. Part 0: Setup the UART connections (for TAs) In this part, we will connect the HiFive1 and the Raspberry Pi 4 boards via two UART channels. (Note that this step will be performed by the TAs.) […]

Board-to-Board Communication Read More »

RS NGP800 POWER SUPPLIES OFFER UP TO FOUR INDEPENDENT CHANNELS IN A SINGLE INSTRUMENT

R&S NGP800 POWER SUPPLIES OFFER UP TO FOUR INDEPENDENT CHANNELS IN A SINGLE INSTRUMENT

Rohde & Schwarz released the R&S NGP800 family of power supplies, which include two and four channel models. Channels can be operated fully independently or synchronized, and features include a 5” high-resolution touch screen, which also displays detailed statistics. The devices offer voltages up to 250V, currents up to 80A, and power up to 800W. Each channel

R&S NGP800 POWER SUPPLIES OFFER UP TO FOUR INDEPENDENT CHANNELS IN A SINGLE INSTRUMENT Read More »

PlayPlace Lighting Using NeoPixels

PlayPlace Lighting Using NeoPixels

Electronic enthusiasts searching for a project to keep them busy this weekend, may be interested in a super cheap DIY Raspberry Pi oscilloscope published to GitHub website called Scoppy. The super affordable oscilloscope consists of an Android application combined with a Raspberry Pi Pico microcontroller and firmware. The Raspberry Pi powered oscilloscope uses signals measured by the

PlayPlace Lighting Using NeoPixels Read More »

PARTICLE ACCELERATOR FITS ON A CHIP

PARTICLE ACCELERATOR FITS ON A CHIP

Researchers at Stanford University have demonstrated the acceleration of electrons through what they describe as an “On-chip integrated laser-driven particle accelerator”, detailed in a recent paper published in the Science journal. by Tom Abate On a hillside above Stanford University, the SLAC National Accelerator Laboratory operates a scientific instrument nearly 2 miles long. In this

PARTICLE ACCELERATOR FITS ON A CHIP Read More »

RS®NGM200 POWER SUPPLY SERIES ARE TOP CLASS PSUS

R&S®NGM200 POWER SUPPLY SERIES ARE TOP CLASS PSUS

Thanks to their high accuracy and fast load recovery time, the R&S®NGM200 power supplies are perfect for challenging applications. Their two-quadrant architecture allows them to function both as a source and a sink to simulate batteries and loads. Their short recovery times enable them to handle fast load changes that occur, for example, when mobile communications devices

R&S®NGM200 POWER SUPPLY SERIES ARE TOP CLASS PSUS Read More »

Raspberry PI GPS Module

Raspberry PI GPS Module

PRODUCT DETAILS Features -165 dBm sensitivity, 1Hz (Default), up to 5Hz, 66 channels At least 100mA current draw to startup. PPS output can be used to coordinate a time with a satellite. Internal patch antenna which works quite well when used outdoors SMA connector for external active antenna for when used indoors Fix status LED

Raspberry PI GPS Module Read More »

Pimoroni Automation pHAT

Pimoroni Automation pHAT

PRODUCT DETAILS Automation HAT’s little bro’. The most compact way to take control of and monitor your world! We’ve pulled together a great set of features into this home monitoring and automation controller. With a relay, analog channels, powered outputs, and buffered inputs (all 24V tolerant) you can now hook up a plethora of goodies

Pimoroni Automation pHAT Read More »

Scroll to Top