Run Windows 10 applications on an Adafruit SPi touchscreen for Raspberry Pi. Follow instructions to install the display driver and touch. Story How it Works This project explains how to use the Adafruit PiTFT capacitive touch screen for Raspberry Pi. To support this screen, a kernel-mode display-only driver was created to establish direct access to […]
Windows 10 IoT Core for Adafruit SPI Touchscreen Read More Ā»
PiJuiceĀ at instructables.com designed an interesting compact camera project with raspberry pi.Ā Raspberry Pi A+Ā is used in this project as it is the cheapest and smallest available Raspberry Pi. The real challenge in this kind of portable Pi projects is powering the Raspberry Pi. This issue is solved using PiJuiceāan all in one battery module for the
A Compact Camera Using Raspberry Pi A+ And Adafruit TFT Display Read More Ā»
Overview Is this not the cutest little display for the Raspberry Pi? It features a 2.8″ display with 320×240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc.
Adafruit PiTFT – 2.8″ Touchscreen Display for Raspberry Pi Read More Ā»
Long story short, I installed both of the aforementioned programs on my Raspberry Pi but, in doing so, I was able to navigate to only ownCloud. After doing some digging around the internets, I found the solution. AsĀ Ā smithg400 on Raspberry Piās forums pointed-out, both WebIDE and ownCloud listen for connections on port 80 of their
Using both ownCloud and Adafruitās WebIDE on the Raspberry Pi Read More Ā»
What Are We Doing Here? In an earlier post I described how to use the py-gaugette library to drive an Adafruit 128×32 monochrome OLED display from a Raspberry Pi, and a followup article added high-quality fonts. Iāve now updated the library to run on the BeagleBone Black and to support Adafruitās larger 128×64 display. On
Controlling an Adafruit SSD1306 SPI OLED With a Beaglebone Black Read More Ā»
As part of my Big Trak refurbishment (not going as well as I wanted it to), I decided to use the Adafruit Prototyping Pi Plate to mount the additional electronics on. If youāre not familiar with it, then this is it: So itās a double-sided PCB with a GPIO connector tracked to various pads round
Adafruit Protoplate for the Rasbperry Pi Read More Ā»
