output

HSN 1000 Nuclear Event Detector

HSN-1000 Nuclear Event Detector

DDC’s HSN-1000 radiation-hardened Hybrid Nuclear Event Detector (NED) senses ionizing radiation pulses generated by a nuclear event, such as the detonation of a nuclear weapon, and rapidly switches its output from the normal high state to a low state with a propagation delay time of less than 20ns. The active low Nuclear Event Detection signal

HSN-1000 Nuclear Event Detector Read More »

Maxim Integrated 2.7V to 18V Input MAX17250 DC DC Boost Converter

Maxim Integrated 2.7V to 18V Input MAX17250 DC-DC Boost Converter

Maxim MAX17250 DC-DC Boost Converter is a high-efficiency, low quiescent current, synchronous boost (step-up) converter with True Shutdown™, programmable input current limit, and short-circuit protection. The MAX17250 has a wide input voltage range of 2.7V to 18V and generates an output voltage of 3V to 18V. The MAX17250 has a maximum on-time of 800ns and

Maxim Integrated 2.7V to 18V Input MAX17250 DC-DC Boost Converter Read More »

An introduction to GPIO Settings

An introduction to GPIO Settings

Working with microcontrollers means managing GPIO pins at some point. Many configurations have been developed for modern microcontrollers which can lead to some “fancy” terms that may confuse programmers. Its important to understand all of this to avoid confusion and errors while programming. First, some terms need to be understood. GPIO pins have tri-state logic

An introduction to GPIO Settings Read More »

ESP32 LyraT – An Open Source Development Board For Smart Audio Applications

ESP32-LyraT – An Open Source Development Board For Smart Audio Applications

Espressif systems has been working on different audio applications including smart speakers. Despite the fact that they have been developing their audio applications, as of February 2018, none of ESP32 software development kits was easily accessible and the hardware kits were not able to take on any new tasks. So, there were no chances to

ESP32-LyraT – An Open Source Development Board For Smart Audio Applications Read More »

ApplePi DAC Audio HAT Add on For The Raspberry Pi Features 24 bit DAC And A 128dB SNR

ApplePi DAC Audio HAT Add-on For The Raspberry Pi Features 24-bit DAC And A 128dB SNR

Orchard Audio quickly exceeded its $5K Kickstarter goal for its ApplePi DAC HAT board, which it is promoted as “the most advanced and highest performance sound card hat for the Raspberry Pi.” You can order the add-on board from May 13 starting at $175. Options include a $5 stacking header and a $25 5.25V, 3A power supply. The ApplePi

ApplePi DAC Audio HAT Add-on For The Raspberry Pi Features 24-bit DAC And A 128dB SNR Read More »

Banana Pi BPI W2 SBC – A Multimedia Router And NAS Board That Runs Android Or Linux

Banana Pi BPI-W2 SBC – A Multimedia Router And NAS Board That Runs Android Or Linux

SinoVoip has released Banana Pi BPI-W2 multimedia network and smart NAS router SBC. The BPI-W2 has a faster processor and more advanced features than last year’s Banana Pi BPI-R2. However, the new model has only two Gigabit Ethernet ports instead of four. This SBC is designed for applications such as high wireless performance, home entertainment, home automation, and

Banana Pi BPI-W2 SBC – A Multimedia Router And NAS Board That Runs Android Or Linux Read More »

Qoitech’s power measurement tool in distribution

Qoitech’s power measurement tool in distribution

Power measurement software by Qoitech is available from Digi-Key Electronics, following the signing of a worldwide distribution agreement to distribute Otii, a power measurement tool with software. Otii provides developers with the means to simplify power measurement of applications and devices, especially those targeting the IoT space and aiming for optimised, long battery life. Otii

Qoitech’s power measurement tool in distribution Read More »

Scroll to Top