The DVR shipped with a cheap nasty little remote that didn’t even work when I first came to look at this project – the diode at the top was attached so badly (a dry solder joint) that I needed to exact some repairs before even getting started. The Plan The plan is to have a device to receive the …
This project enables a Raspberry Pi, Beaglebone, or other small computer to be powered over an Ethernet cable. This very handy if you have a Pi somewhere where getting mains power to it is difficult, or if you want to run several devices from one central UPS. It’s cheap and quite simple to put together, …
PiPoE – powering a Raspberry Pi over Ethernet Continue Reading
This tutorial is based on a previous Instructable – Building robots with Raspberry Pi and Python The aim is to present an example of how to setup a Bluetooth serial connection with Arduino to control a Raspberry Pi robot. But lets take it one step further and add Python to generate sounds based on the commands sent …
Raspberry Pi Robot controlled over Bluetooth Continue Reading
I recently purchased a Cisco Catalyst 3560 48 port PoE Switch and soon realized that I didn’t need 48 ports. I soon started thinking of ways of using that power for other needs like charging phones or running devices. It then hit me that I could run a Raspberry Pi off PoE by use of …
Aim of the project: In this project we have developed a platform to remotely control surveillance robot controlled over Ethernet. It will enable us to monitor the activities in the remote and sensitive areas such as naxalite areas and etc. In traditional security systems, monitoring devices are usually mounted on fixed locations. In such cases, …
Python based spy robot controlled over Ethernet using Raspberry pi Continue Reading
