Project Description This project assumes you already have a Model A or B Raspberry Pi, power supply, HD card, screen, keyboard, network etc. Raspbian Wheezy OS. In this project I will show you how to construct a wireless switch. This project can be adapted to suit any application where you need a wireless […]
Construct a wireless switch or motion sensor Read More »
There are thousands of free radio stations on the internet, and with this project you can listen to all of them from one tiny little box. So let’s build our streaming radio using a Raspberry Pi, a speaker and a few odds and ends… What you’ll need A wireless internet connection 2 x momentary switches
Turn your Raspberry Pi into a portable Wi-Fi streaming radio Read More »
Remotes are everywhere. They are the interface to your TVs, music systems and what-not. You probably have a few spare ones lying around, devastated at the demise of their better halves. Cheer them up and put them back into use! (Skynet approves…) Here are some reasons why you should implement or emulate remotes in your
Read emulate remotes with Arduino and Raspberry Pi Read More »
Assalamualaikum, Hi. I would love to share my recent project, connecting an IR receiver to Raspberry Pi’s GPIO. Warning! Playing around with Rpi’s GPIO is dangerous if you didn’t know what you’re doing. I’ll not hold any responsibility on any failure of your device while following my guide. GPIO for Rev.1 Rpi’s is different from
Remote receiver to Raspberry Pi via GPIO Read More »
My Brief Build a smoke alarm that sends an email and text message when it goes off. The Device After a fe w days of investigation into possible solutions, I opted to build one using a Raspberry PI and a cheap smoke alarm, linked by radio signal. When the Smoke Alarm is triggered, it will
Raspberry PI connected Wireless Smoke Alarm Read More »
Here is the hardware block diagram for MouseAir. MouseAir is a cat toy (fake mice) launching system. It has the ability to read the cat’s RFID tag, motion detection as well as ultrasonic detection all controlled remotely from your iPad/iPhone running RasPiConnect. The MouseAir system is built around a Raspberry Pi controlling all the devices and
MouseAir Block Diagram – Raspberry Pi Read More »
