Share this: The guitar ‘Toing’ sound from the ’70s was epic, and for the first time listener it was enough to get a bunch of people hooked to the likes of Aerosmith. Reverb units were all th... Read more
Share this:Since the beginnings of the Raspberry Pi, [Tibbbbz] has wanted to build a DIY guitar effects board and amp simulator. A device like this, and similar ones sold by Boss and Kemper,... Read more
Share this:The Apollo Lake SoC has already be used in several boards and modules. Avalue, a technology company that has launched several single board products and with focus on innovative em... Read more
Share this:SinoVoIP, the makers of the DIY Raspberry Pi lookalike board, the BananaPi has unveiled a new maker board designed for media, storage, and networking applications called the Banan... Read more
Share this:Nui is an IR controlled volume controller for analog audio. It sits between your audio source and speakers and can amplify or reduce the volume using IR commands (and eventually B... Read more
Share this:Introduction This tutorial shows how to put together a sound visualizer that I created, during my time in the SparkFun HIR program. The end goal for the project was to have a soun... Read more
Share this:Introduction This guide is a follow up to the first write up I did for my participation in the SparkFun HIR program. This guide shows how to setup a music visualizer for PCs/lapto... Read more
Share this:Shed some light (er, sound) on the elusive mysteries of your pets’ antics while away from home! This Internet of Things (IoT) Bark Back project monitors and uploads the leve... Read more
Share this:Newark Element14 and Wolfson have launched an HD-ready Wolfson Audio Card for the Raspberry Pi with 192kHz sampling, MEMS mics, and I/O including S/PDIF. The Wolfson Audio Card ex... Read more
Share this:At a glance use a Raspberry Pi to send and receive audio streams over the network streaming is based on standard RTP streams uncompressed audio streaming over ethernet point-to-mu... Read more
