How to Translate SMS Text Messages into Morse Code Using GSM/GPRS Mobile Kit

Contents Introduction Step 1: Connection Step 2: The code Links and Documentation Introduction Go to index This tutorial allows the user to translate SMS text messages into morse code. When the module receives a SMS it will reproduce it in morse code through the buzzer. Ingredients: - 1 x GSM/GPRS Mobile Kit 1x Platform 1x GPRS/GSM QUADBAND MODULE (SIM900) 1x GPRS antenna 1x Buzzer 1x 220Ω resistors 1x Brea ...

Read more

Geolocation Tracker (GPRS + GPS) with SIM908 over Arduino and Raspberry Pi

The new shield designed for Arduino and Raspberry Pi integrates the SIM908 module which counts with both GPRS and GPS technologies what allows to easily perform realtime tracking applications. The idea is simple: read the GPS coordinates (longitude and latitude) and send them by using a HTTP request to a web server. Then use a browser to load the PHP webpage which uses Googlemaps to show the location in rea ...

Read more

AVR/Arduino ISP programmer using the Raspberry Pi GPIOs

Introduction As a fully-featured Linux computer there are many external programmers that can be used with your Raspberry Pi to program the Atmel AVR range of microprocessors. It's also possible to use the general purpose input/output lines (GPIOs) found on the Raspberry Pi to implement an ISP programmer with minimal extra hardware. I say "with minimal extra hardware" because although it can be done with no ...

Read more

Raspberry Pi & the Neo 6M GPS

Previously I built a project where I connected a Neo-6M to an Arduino, but this time around, I wanted to show how to use a GPS with the Raspberry PI. Now there are several USB solutions, and apps that work with them, but I wanted to show how to use a $20 GPS module with a a serial UART, and Python code to decode the NMEA strings. Then you can write your own GPS interface, or combine the data with Google Map ...

Read more

Smartphone Garage Door Opener

I had an extra Raspberry Pi laying around from when I ordered two of them a few months ago.   I used the first one for a media center and it runs XBMC flawlessly allowing me to watch downloaded movies on my television.  I pretty much have my entire DVD collection converted to DIVX format saved on my network for easy access.  I could not find a use for the second one until I started to read about General Pur ...

Read more

How to Send a Temperature Emergency SMS Using Tracking Kit (GPRS + GPS)

Contents Introduction Step 1: Connection Step 2: The code Links and Documentation 1. Introduction Go to index This tutorial allows the user to measure the temperature of an object. When the temperature is 0ºC or less, a text message is sent to a mobile phone in which the temperature and the position (laltitude and longitude) of the module is indicated. Ingredients: - 1 x Tracking Kit (GPRS + GPS) : 1x Platf ...

Read more

GPS Module for Arduino and Raspberry Pi

Introduction Ingredients: 1 x GPS module 1 x Antenna 1 x Arduino Uno or 1 x Starter Kit for Raspberry Pi + Raspberry Pi 1 x Two small wires (Red an Black) 1 x PC Preparation Time: The GPS module for Arduino and Raspbery Pi is a small electronic circuit that allows to connect to your Arduino/Raspberry Pi board to get position and altitude, as well as speed, date and time on UTC (Universal Time Coordinated). ...

Read more

GPS and the Raspberry Pi

This example will show how to use the Dexter Industries GPS shield with the Raspberry Pi using the Arduberry. Step 1: Hardware Required 1.Raspberry Pi 2.Arduberry 3.Dexter Industries GPS Shield Step 2: Connection the shield Slide on the Dexter Industries GPS shield on the Arduberry. Slide the Arduberry on the Raspberry Pi and power it on. Step 3: Adding the library Download the Dexter Industries GPS library ...

Read more

GSM Remote Control – GSM Module Raspberry Pi,

This GSM Mobile is used for our Remote Control (for example Gate Control, Temperature Control….). We use the word ‘module’ because, unlike what we did in our remote control projects, this time around the mobile phone is not mounted on a printed board, but rather on a small auxiliary board which is then inserted in a connector specifically created on the main printed board; though this alternative may seem r ...

Read more

Adafruit Ultimate GPS on the Raspberry Pi

How easy is it to get your Raspberry Pi eavesdropping on satellites 20,000 km up in the sky? Wonderfully easy thanks to Linux, and affordable thanks to Adafruit's Ultimate GPS Breakout! This quick learning guide will show you everything you need to do to add position tracking to your Pi project using the open source GPS daemon 'gpsd' and an inexpensive USB to TTL adapter cable or via direct-wiring to the bu ...

Read more

© 2015 Powered By Engineering Projects Team, Raspberry Pi Projects

Scroll to top