Note: I only write about what I know. Although there are many Arduinos and Arduino type products, I only have experience with the Arduino Uno Rev3. Likewise, the only Atmel microcontroller I know is the ATmega328P. A Little Background (well not so little) I have Atmel ATmega328P microcontrollers on two devices: An Arduino Uno (Rev […]
Jig To Load a Bootloader and Upload Sketches To ATmega328P Read More »
Here are some first passes at a Raspberry Pi shield design. I don’t quite yet know what I’m doing, but here’s the rough idea I’m aiming at. I’m not sure how sensible it is, so I’d love to get any feedback! It’d be nice to have a device that: – controls a filter switcher motor
ircam raspberry pi shield — first steps Read More »
Hello world, today I am bringing you another instructable at the request of another member. I recently made an instructable about booting the Raspberry Pi from a usb flash drive (Boot the Raspberry Pi from USB). In that instructable I had my RCA connection “jerry-rigged” to work fast to display on a small CRT television
Raspberry Pi 2: Quick n’ Easy RCA Read More »
Step 1: Step 1: Connecting the Arduino and Raspberry Pi This step assumes you are using the external UART for connecting the Raspberry Pi with an Arduino Mega 2560. It’s also possible to use this with another Arduino. The Arduino uses 5V logic but the Raspberry Pi uses 3.3V logic, so a conversion must be
Contents: Introduction Steps Index Links and Documentation Introduction Ingredients: 1 x Raspberry Pi 1 x RFID 125 kHz shield for Raspberry Pi 1 x RFID Antenna 2 x Read only cards (EM4100) 2 x Programmable cards (Read-Write Cards, T5557) NOTE: If you don’t have a Raspberry Pi you can get one buying a Raspberry Pi
Documentation: RFID 125 kHz shield for Raspberry Pi tutorial Read More »
(This is a collaboration between myself and my friend and purveyor of fine electronic bits, S.K. Pang) How would you connect an Arduino to a Raspberry Pi? Just plug it in via USB as you would normally do with an ordinary computer, right? That takes up one of the precious USB ports and while you
Introducing Ponte: Arduino – Raspberry Pi Bridge Read More »
you can go directly to Section 9 also. make high quality brain wave interface as low cost and small size is my over 20 years of dream. To do so need mass production, need work with investor to realize that way. not just only my thinking many people ask me to have low cost brain
Open brain wave interface hardware Read More »
Hello everyone. Welcome to my First Instrucatble. You may be asking yourself “I want a Raspberrry Pi, but I don’t know how to start.” If you have ever asked yourself this thought, than this is the right Instrucatble for you. In this guide you will learn what Pi is best for you, how to download
Get Started With Raspberry Pi Read More »
Have you ever wanted a portable computer you can take with you? This is the easiest way to build your own. For those of you who do not know what a Raspberry Pi is, it is a complete computer about the size of deck of cards that can run many different kinds of Linux. This
Make a Portable Computer Using a Raspberry Pi Read More »
Overview This is a guide for building a DIY power supply/regulator for powering a Raspberry Pi and a USB audio output interface. The objective is to create a pure, regulated 5.0v power supply that allows the Raspberry Pi to run stably but also, more importantly, allows the USB audio device to avoid creating jitter in
A DIY Power Supply For Hi-Fi USB Audio With Your Raspberry Pi Read More »
